Glass Blow Molding and Turning Facility
October 1, 2026
5) NEW Glass Blow Molding Lathes (Sizes 100 mm, 80 mm & 65 mm Bore Capacity) 15) Glass Blow Molding Lathes and Support Machinery, Kilns, Bridgeport Mills, Engine Lathes, Sand Blast Cabinets, Tooling, Support Tools, Forklifts
La Mirada, CA
| Auction Location: | 14610 INDUSTRY WAY LA MIRADA. CA |
| Auction Date: | Thursday, October 1, 2026 |
| Auction Time: | STARTING @ 11:00 AM. (PST) |
| Inspection: | Morning of sale from 8:00am to 11:00am. |
| Download Brochure: | Click Here to Download |
On-line bidding thru Bidspotter
Click logo below to Register for the Auction
FEATURING :
Litton mdl. E9A-P 175mm Glass Blowing Lathe s/n 136 w/ 175mm Thru Spindle Bores, 28″ (Over Accessory Table) x 44 1/2″ (Chuck Face to Chuck Face), Motor and Controller, 16″ 3-Jaw Chucks (SOLD AS-IS – NO WARRANTY) 2011 Import mdl. CS125-390 125mm Glass Blowing Lathe s/n 1122 w/ (NO MOTOR) 125mm Thru Spindle Bores, 28″ (Over Accessory Table) x 43″ (Chuck Face to Chuck Face), 0-187 RPM, 10″ 3-Jaw Chucks, 110 Volts (SOLD AS-IS – NO WARRANTY) Bethleham mdl. 8A 110mm Glass Blowing Lathe w/ 22″ (Over Accessory Table) x 50.5″ (Chuck Face to Chuck Face), Motor and Controls, 11″ 3-Jaw Chucks (SOLD AS-IS -NO WARANTY)
Import 100mm Glass Blowing Lathe w/ 100mm Thru Spindle Bores, 33″ (Over Accessory Table) x 43″ (Chuck Face to Chuck Face), 0-187 RPM, Stepper Motor and Controller, 12″ 3-Jaw Chucks, 110 Volts (SOLD AS-IS – NO WARRANTY)
Import 100mm Glass Blowing Lathe w/100mm Thru Spindle Bores, 33″ (Over Accessory Table) x 43″ (Chuck Face to Chuck Face), 0-187 RPM, Stepper Motor and Controller, 12″ 3-Jaw Chucks, 110 Volts (SOLD AS-IS – NO WARRANTY)
Import 85mm Glass Blowing Lathe w/85mm Thru Spindle Bores, 34″ (Chuck Face to Chuck Face), Motor and Controller, 10″ 3-Jaw Chucks, 110 Volts (SOLD AS-IS – NO WARRANTY)
(5) Import 85mm Glass Blowing Lathes w/(NO MOTOR, NO CONTROLLER) 85mm Thru Spindle Bores , 34″ (Chuck Face to Chuck Face), 10″ 3-Jaw Chucks, 110 Volts (SOLD AS-IS – NO WARRANTY)
Import 85mm Single Head Glass Blowing Lathe w/ (HAS MOTOR BUT NO CONTROLLER) 85mm Thru Spindle Bore, 10″ 3-Jaw Chuck (SOLD AS-IS – NO WARRANTY)
Import 80mm Glass Blowing Lathe w/ 80mm Thru Spindle Bores, (NO ACCESSORY TABLE) 41″ (Chuck Face to Chuck Face), 0-187 RPM, Stepper Motor and Controller, 10″ 3-Jaw Chucks, 110 Volts (SOLD AS-IS – NO WARRANTY)
Import 80mm Glass Blowing Lathe w/ 80mm Thru Spindle Bores, (NO Accessory Table) x 34 1/2″ (Chuck Face to Chuck Face), Motor and Controller, 10″ 3-Jaw Chucks, 110 Volts (SOLD AS-IS – NO WARRANTY)
(6) Import 65mm Glass Blowing Lathes w/ 65mm Thru Spindle Bores, 23″ (Over Accessory Table) x 43 1/2″ (Chuck Face to Chuck Face), 0-187 RPM, Stepper Motor and Controller, 8″ 3-Jaw Chucks, 110 Volts (SOLD AS-IS – NO WARRANTY)
Import 45mm Glass Blowing Lathe w/ (NO MOTOR, NO ACCESSORY TABLE) 45mm Thru Spindle Bores, 34 1/2″ (Chuck Face to Chuck Face), 6″ 3-Jaw Chucks (SOLD AS-IS – NO WARRANTY)
Glass Lathes (2 – FOR PARTS) (SOLD AS-IS – NO WARRANTY)
Kilns :
Paragon mdl. TNF24 2300 Deg. F Electric Kiln s/n 342461 w/ Sentry 2.0 Digital Controls, 24” Dia x 29” Cap (SOLD AS-IS – NO WARRANTY)
Skutt mdl. GM-1414 1800 Deg. F Electric Kiln s/n 005131 w/ Digital Controls, 24” x 41” x 13” Cap (SOLD AS-IS – NO WARRANTY)
Aim Kilns mdl. PERS27 2000 Deg. F Electric Kiln w/ Digital Temp Control, 30” x 43” x 27” Cap (SOLD AS-IS – NO WARRANTY)
Aim Kilns mdl. PERS27 2000 Deg. F Electric Kiln w/ Digital Temp Control, 30” x 43” x 27” Cap (SOLD AS-IS – NO WARRANTY)
Aim Kilns “Performer” 2000 Deg. F Electric Kiln w/ Digital Temp Control, 30” x 43” x 27” Cap (SOLD AS-IS – NO WARRANTY)
Aim Kilns “Performer” 2000 Deg. F Electric Kiln w/ Digital Temp Control, 30” x 43” x 27” Cap (SOLD AS-IS – NO WARRANTY)
Aim Kilns 2000 Deg. F Electric Kiln (NEEDS WORK) w/ Digital Temp Control, 30” x 43” x 27” Cap (SOLD AS-IS – NO WARRANTY)
PARTIAL & ABBREVIATED TERMS AND CONDITIONS OF AUCTION
ALL TERMS AND CONDITIONS BEHIND THE BIDDERS CARD SUPPLIED WILL APPLY TO ALL AUCTION SALE ITEMS AND FOR ALL PRIVATE NEGOTIATIONS.
BY PARTICIPATING AND BIDDING AT AUCTION YOU ARE LEGALLY BINDING A CONTRACT WITH THE AUCTION COMPANY.
ALL INVOICES MUST BE PAID WITHIN 24 HOURS FROM AUCTION DATE. IT IS PROHIBITED TO BID ON ANY ITEM THAT CANNOT BE PAID IN FULL WITHIN 24 HOURS FROM AUCTION DATE. PAYMENTS MUST BE CASHIERS CHECK, WIRE TRANSFER, OR LETTER OF GUARANTEE FROM BANK.
ALL ITEMS MUST BE REMOVED BY 3:00 PM (PST) NO LOADING OR PICK UP ON SATURDAY AND SUNDAY.
NO LOADING BY AUCTIONEER OR SELLER.
BUYERS PREMIUM WILL BE 15% AND 18% FOR ALL ONLINE BIDDING ON BIDSPOTTER.COM.
AUCTIONEER IS NOT RESPONSIBLE FOR MIS IDENTIFICATION OF ANY EQUIPMENT OR ASSETS BEING SOLD AT AUCTION EITHER BY VERBAL OR WRITTEN. IT IS THE BUYER’S RESPONSIBILITY TO INSPECT THE GOODS AND ACCERTAIN IF THE SPECIFICATIONS, DESCRIPTIONS AND CONDITION OF THE GOODS CONFORM TO THE BUYER’S REQUIREMENT INCLUDING SERIAL NUMBERS.
BUYER ACKNOWLEDGES THAT THE EQUIPMENT OR ITEMS PURCHASES ONCE MAY HAVE CONTAINED, EXPOSED TO , AND OR UTILIZED HAZARDOUS MATERIAL. THERE MAY BE SURFACES ON ITEMS WHERE DECONTAMINATION CANNOT BE VALIDATED: AS SUCH, THE BUYER OR BIDDER ACKNOWLEDGING THAT THEY ARE ACCEPTING THIS EQUIPMENT OR ITEMS IN AN “AS IS” CONDITION.
BUYER AND THEIR ASSOCIATES WILL HOLD AUCTIONEER HARMLESS AGAINST ANY AND ALL CLAIMS AND ACTIONS ARISING OUT OF THE PARTICIPATION OF THE INDEMNITEE IN THE ACTIVITY, INCLUDING, WITHOUT LIMITATION, EXPENSES, JUDGEMENTS, FINES, SETTLEMENTS AND OTHER AMOUNTS INCURRED IN CONNECTION WITH ANY LIABILITY, SUIT, ACTION, LOSS, OR DAMAGE ARISING OR RESULTING FROM THE INDEMNITEE’S PARTICIPATION IN THE AUCTION.
ALL BIDDERS MUST ONLY USE MACHINERY MOVERS WITH LIABILITY INSURANCE OF $2,000,000 OR HIGHER. NO ITEMS SHALL BE REMOVED UNLESS PAID IN FULL AND ALL ITEMS SHALL BE REMOVED IN THE TIME ALLOCATED BY THE AUCTIONEER.
ALL SALES ARE FINAL, AND ALL ITEMS ARE SOLD AS IS WHERE IS, WITH ALL FAULTS AND DEFECTS.
THERE ARE NO GUARANTEE OR WARRANTY TO ANY ITEMS SOLD (RE: MAKE, MODEL, YEAR, HOURS, MILES, OR MERCHANTABILITY BY AUCTIONEER OR SELLER).
BUYERS RESPONSIBILITY TO INSURE PROPER USE FOR SAFETY.
ALL ITEMS ARE SOLD AS “PARTS ONLY” BUYER ACKNOWLEDGES THAT THE GOODS ARE PRE-OWNED AND GOODS WERE EITHER DESIGNED NOR MANUFACTURED BY SELLER. SELLER HAS NO KNOWLEDGE OF OR CONTROL OVER THE PRIOR USE OR MISUSE OF THE GOODS OR ANY MODIFICATIONS TO THE GOODS FOLLOWING ORIGINAL MANUFACTURER.
NEITHER DOES SELLER HAVE KNOWLEDGE OR CONTROL OVER THE APPLICATION OF THE GOODS BY BUYER. IT IS THE BUYER’S SOLE RESPONSIBILITY TO PROVIDE PROPER SAFETY DEVICES, EQUIPMENT AND INSTRUCTIONS FOR ANY PARTICULAR USE OR TAKE NECESSARY STEPS TO CONFORM THE GOODS AND OPERATION THEREOF TO ALL FEDERAL, STATE OR LOCAL GOVERNMENT SAFETY STANDARDS AND LAWS INCLUDING WITHOUT LIMITATION THE OCCUPATIONAL SAFETY AND HEALTH ACT OF “OSHA”. ANNOUNCEMENTS MADE BY THE AUCTIONEER ON THE DAY OF THE AUCTION TAKE PRECEDENCE OVER ANY PREVIOUS PRINTED MATERIAL PERTAINING TO THIS AUCTION. AUCTIONEER RESERVES THE RIGHT TO REMOVE OR ADD TO ANY AUCTION ITEMS ON THE LIST UNTIL AUCTION TIME.
TERMS OF SALE:
CASH OR CASHIERS CHECK ONLY.
15% BUYERS PREMIUM ON ALL PURCHASES.
$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH
DEPOSIT TOWARDS ALL PURCHASES. ALL SALES
ARE SUBJECT TO CALIFORNIA SALES TAX. THERE
WILL BE NO EXCEPTIONS.