AUCTION LOCATION: 1179 CALLE SUERTE, CAMARILLO CA
AUCTION DATE: THURSDAY SEPTEMBER 17, 2020 @ 11:00a.m. PST
AUCTION PREVIEW: MORNING OF SALE: FROM 8:00 am to 10:30 am
On-line bidding thru bidspotter.com
COVID-19 REGULATION AND REQUIREMENTS:
1) DO NOT VISIT AUCTION SITE IF YOU HAVE FEVER, SHORTNESS OF BREATH, COUGH, NASAL CONGESTIONS, RUNNY NOSE, SORE THROAT, NASUEA,VOMITING AND / OR DIARRHEA.
2) ALL VISITORS, CUSTOMERS, MACHINERY MOVERS, TRUCKERS, SUB CONTRACTORS MUST WEAR A MASK BEFORE ENTERING AUCTION FACILITY.
3) ALL VISITORS MUST FOLLOW SOCIAL DISTANCING OF 2 METRES (6 FT-6 IN) WHEN VISITING AUCTION FACILITY. ONE GROUP AT A TIME WILL BE ALLOWED IN THE FACILITY FOR PREVIEW AND PICK UP
ULTRA PRECISION HAAS CNC MACHINING FACILITY
HANSA TOOLING & ENGINEERING: Download Brochure
FEATURING:
CNC Mills :
Dec-1997 Haas VF-3 4-Axis CNC Vertical Machining Center s/n 12969 w/ Haas Controls, 20-Station ATC, CAT-40 Taper Spindle, 7500 RPM, 20Hp Vector Drive, Gearbox, Rigid Tapping, Programmable Coolant Nozzle, Quick Code, Floppy Disc, 18” x 48” Table, Coolant.
1998 Haas VF-2 4-Axis CNC Vertical Machining Center s/n 14209 w/ Haas Controls, Hand Wheel, 20-Station ATC, CAT-40 Taper Spindle, 10,000 RPM, Thru Spindle Coolant, Rigid Tapping, 30Hp High Torque Motor, Brushless Servos, 4mb Extended Memory, 1000 Blocks/Sec, Programmable Coolant Nozzle, Quick Code, Coordinate Scaling, Macro Code, Floppy Disc, Chip Auger, 14” x 36” Table, Coolant.
Lagun “Lagunmatic” 3-Axis CNC Vertical Mill w/ Delta 10CNC Controls, 40-Taper Spindle, Power Drawbar, Dial Change RPM, 10” x 44” Table.
CNC Lathe :
2003 Haas SL-20TB Big Bore CNC Turning Center s/n 66151 w/ Haas Controls, Tool Presetter, 10-Station Turret, 3400 RPM, Hydraulic Tailstock, 30Hp Vector Dual Drive, Haas VOP-C, Rigid Tapping, M19 Spindle Orientation P & R Codes, Parts Catcher, Chip Auger, 208/230, Floppy Disc, 10” 3-Jaw Power Chuck, 5C Spindle Nose, Coolant.
Hardinge / Omniturn DSM-59 CNC Cross Slide Lathe s/n DV-59-14371 w/ Omniturn CNC Controls, 5C Spindle, 6” x 12” Cross Slide Table, Coolant.
Lathes :
Hardinge HLV-EM Wide Bed Tool Room Lathe s/n HLVH-9356-T w/ Anilam Wizard 111 DRO, 125-3000 RPM, Inch/mm Threading, Tailstock, Tool Post, 5C Spindle, 6” 3-Jaw Chuck, Coolant.
Graziano Tortona SAG-14 14” x 40” Geared Head Gap Bed Lathe s/n 57652 w/ Anilam Wizard 300Plus Programmable DRO, 80-1500 RPM, Inch/mm Threading, Tailstock, Steady Rest, Aloris Tool Post, Trava-Dial, 12” 4-Jaw Chuck, 8” 3-Jaw Chuck.
Weiler LZ330 12” x 34” Geared Head Gap Bed Lathe s/n 2192 w/ 24-2000 RPM, Inch/mm Threading, Tailstock, Kirkelie Tool Post, 5C Spindle, 6” 3-Jaw Chuck.
Mills:
Lagun FTV-2S Vertical Mill s/n SE-20008 w/ Lagun DRO, 2Hp Motor, Dial Change RPM, 30-Taper Spindle, Power “X” and “Y” Feeds, 10” x 50” Table.
Tree 2UVR Vertical Mill w/ 1.5Hp Motor, 60-3300 Dial Change RPM, Colleted Spindle, Power Feeds, 10.5” x 42” Table.
Support Machinery :
Pat Mooney 10” Horizontal Band Saw w/ Manual Clamping, Work Stop, Coolant.
DoAll mdl. 2013-0 20” Vertical Band Saw s/n 321-73140 w/ Blade Welder, Dial Change FPM, 24” x 24”Miter Table.
Chevalier FSG-618M 6” x 18” Surface Grinder s/n FA3157023 w/ Magnetic Chuck.
Baldor Pedestal Carbide Tool Grinder.
Baldor and Central Machinery Pedestal Grinders.
Rockwell 6” Pedestal Belt Sander.
Rousselle No. 2 15-Ton OBI Stamping Press (FOR PARTS) w/ 2” Stroke, 1.5” Adjustment, 12” Shut Height,170 Strokes/Min, 11” x 16” Bolster Area.
Clausing 2-Head Gang Drill Press w/ mdl’s 1666 and 1687 Variable Speed Heads, 500-4000 Dial DRM, 20”x 30” Table.
Miller Dynasty 200DX Arc Welding Power Source s/n ME100909L w/ Miller Coolmate-1 Cooler Cart.
Lincoln AC-225S Arc welding Power Source.
(2) Welding Torch Carts w/ Acces.
Tennsmith T3616 37” x 16GA Foot Shear s/n 11512 w/ Back Gauge.
Central Machinery 36” Roll/Brake/Shear.
Carolina CP100 30-Ton Hydraulic H-Frame Press.
US General 5Hp Vertical Air Compressor w/ 60 Gallon Tank, Central Pneumatics Refrigerated Air Dryer.
Husky 3.2Hp Vertical Air Compressor w/ 60 Gallon Tank..
Tooling :
Haas HRT-210 4 th Axis Rotary Head s/n 213485 w/ 5C Adaptor.
Haas 4 th Axis 5C Rotary Head w/ Haas 5C Servo Controller.
(45) CAT-40 Taper Tooling.
(40) NTMB-40 Taper Tooling.
6”, 5” and 4” Angle-Lock Vises.
5C Indexing Heads and Collet Closers.
(180) 5C Collets.
(3) Huot Drill Cabinets.
Insert Turning and Boring Tooling, Carbide Inserts, Drills, Taps, Reamers, Carbide and High Speed Endmills, Radius Cutters, Key-Slot Cutters, Counterbores and Countersinks.
Assembly Hardware w/ Cabinets.
Inspection :
Mitutoyo PH-A14 14” Optical Comparator s/n 114757410 w/ Mitutoyo QM-DATA 2000 Programmable DRO, Surface and Profile Illumination, 10X and 50X Lens Sets, Stand.
Clean Air Products mdl. CAP557F-WR-12X12X8H 12’ x 12’ Portable Clean Room s/n 11818-17230.
Newport and TMC Technical Lab Test Tables (4) 39” x 78” and (5) 39” x 39”.
MicroVu mdl. 400 10” Table Model Optical Comparator s/n 6171.
Gage Block and Angle Block Sets.
Mitutoyo Digital OD Mics and Calipers.
Kanon 40” Vernier Caliper.
Mitutoyo 6” and 12” Dial Calipers.
Mitutoyo .7”-6” Dial Bore Gage.
Mitutoyo and Starrett OD Mics to 6”.
24” x 48” x 9.5”, 24” x 36” x 3”, 18” x 24” x 5” Granite Surface Plates.
Material and Handling :
Nissan CPH02A25V 4700 Lb Cap LPG Forklift s/n CPH02-921916 w/ 3-Stage Mast, 188” Lift Height, Side Shift, Cushion Tires, 9156 Hours.
Shop Carts, Storage Cabinets and Shelving.
Raw Materials Including Round, Square and Hex Bar Stock, Channel and Angle Stock, Aluminum, Stainless Steel and Cold Roll w/ Racks.
PARTIAL & ABBREVIATED TERMS AND CONDITIONS OF AUCTION
ALL TERMS AND CONDITIONS BEHIND THE BIDDERS CARD SUPPLIED WILL APPLY TO ALL AUCTION SALE ITEMS AND FOR ALL PRIVATE NEGOTIATIONS.
BY PARTICIPATING AND BIDDING AT AUCTION YOU ARE LEGALLY BINDING A CONTRACT WITH THE AUCTION COMPANY.
ALL INVOICES MUST BE PAID WITHIN 24 HOURS FROM AUCTION DATE. IT IS PROHIBITED TO BID ON ANY ITEM THAT CANNOT BE PAID IN FULL WITHIN 24 HOURS FROM AUCTION DATE. PAYMENTS MUST BE CASHIERS CHECK, WIRE TRANFER, OR LETTER OF GUARANTEE FROM BANK.
ALL ITEMS MUST BE REMOVED BYJUNE 12, 2019, 3:00 PM (PST) NO LOADING OR PICK UP ON SATURDAY AND SUNDAY.
NO LOADING BY AUCTIONEER OR SELLER.
BUYERS PREMIUM WILL BE 15% AND 18% FOR ALL ONLINE BIDDING ON BIDSPOTTER.COM.
AUCTIONEER IS NOT RESPONSIBLE FOR MIS IDENTIFICATION OF ANY EQUIPMENT OR ASSETS BEING SOLD AT AUCTION EITHER BY VERBAL OR WRITTEN. IT IS THE BUYER’S RESPONSIBILTY TO INSPECT THE GOODS AND ACCERTAIN IF THE SPECIFICATIONS, DESCRIPTIONS AND CONDITION OF THE GOODS CONFORM TO THE BUYER’S REQUIREMENT INCLUDING SERIAL NUMBERS.
BUYER ACKNOWLEDGES THAT THE EQUIPMENT OR ITEMS PURCHASES ONCE MAY HAVE CONTAINED, EXPOSED TO , AND OR UTILIZED HAZARDOUS MATERIAL. THERE MAY BE SURFACES ON ITEMS WHERE DECONTAMINATION CANNOT BE VALIDATED: AS SUCH, THE BUYER OR BIDDER ACKNOWLEDGING THAT THEY ARE ACCEPTING THIS EQUIPMENT OR ITEMS IN AN “AS IS” CONDITION.
BUYER AND THEIR ASSOCIATES WILL HOLD AUCTIONEER HARMLESS AGAINST ANY AND ALL CLAIMS AND ACTIONS ARISING OUT OF THE PARTICIPATION OF THE INDEMNITEE IN THE ACTIVITY, INCUDING, WITHOUT LIMITATION, EXPENSES, JUDGEMENTS, FINES, SETTLEMENTS AND OTHER AMOUNTS INCURRED IN CONNECTION WITH ANY LIABLITY, SUIT, ACTION, LOSS, OR DAMAGE ARISING OR RESULTING FROM THE INDEMNITEE’S PARTICIPATION IN THE AUCTION.
ALL BIDDERS MUST ONLY USE MACHINERY MOVERS WITH LIABILITTY INSURANCE OF $2,000,000 OR HIGHER. NO ITEMS SHALL BE REMOVED UNLESS PAID IN FULL AND ALL ITEMS SHALL BE REMOVED IN THE TIME ALLOCATED BY THE AUCTIONEER.
ALL SALES ARE FINAL, AND ALL ITEMS ARE SOLD AS IS WHERE IS, WITH ALL FAULTS AND DEFECTS.
THERE ARE NO GUARANTEE OR WARRANTY TO ANY ITEMS SOLD (RE: MAKE, MODEL, YEAR, HOURS, MILES, OR MERCHANTABLITY BY AUCTIONEER OR SELLER).
BUYERS RESPONSIBILTY TO INSURE PROPER USE FOR SAFETY.
ALL ITEMS ARE SOLD AS “PARTS ONLY” BUYER ACKNOWLEDES THAT THE GOODS ARE PRE-OWNED AND GOODS WERE EITHER DESIGNED NOR MANUFACTURED BY SELLER. SELLER HAS NO KNOWLEDGE OF OR CONTROL OVER THE PRIOR USE OR MISUSE OF THE GOODS OR ANY MODIFICATIONS TO THE GOODS FOLLOWING ORIGINAL MANUFACURER.
NEITHER DOES SELLER HAVE KNOWLEDGE OR CONTROL OVER THE APPLICATION OF THE GOODS BY BUYER. IT IS THE BUYER’S SOLE RESPONSIBILITY TO PROVIDE PROPER SAFETY DEVICES, EQUIPMENT AND INSTRUCTIONS FOR ANY PARTICULAR USE OR TAKE NECESSARY STEPS TO CONFORM THE GOODS AND OPERATION THEREOF TO ALL FEDERAL, STATE OR LOCAL GOVERNMENT SAFETY STANDARDS AND LAWS INCLUDING WITHOUT LIMITATION THE OCCUPATIONAL SAFETY AND HEALTH ACT OF “OSHA”. ANNOUNCEMENTS MADE BY THE AUCTIONEER ON THE DAY OF THE AUCTION TAKE PRECEDENCE OVER ANY PREVIOUS PRINTED MATERIAL PERTAINING TO THIS AUCTION. AUCTIONEER RESERVES THE RIGHT TO REMOVE OR ADD TO ANY AUCTION ITEMS ON THE LIST UNTIL AUCTION TIME.
GALLERY COMING SOON
MAP: Online Bidding Only
TERMS OF SALE:
CASH OR CASHIERS CHECK ONLY.
15% BUYERS PREMIUM ON ALL PURCHASES.
$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH
DEPOSIT TOWARDS ALL PURCHASES. ALL SALES
ARE SUBJECT TO CALIFORNIA SALES TAX. THERE
WILL BE NO EXCEPTIONS.
