Precision CNC Machining Turning Facility – December 6, 2022

| November 12, 2022 | 0 Comments

Precision CNC Machining Turning Facility
Precision CNC Machining Turning Facility
AUCTION LOCATION
: 2201 N. GLASSELL STREET, ORANGE, CA
AUCTION DATE: TUESDAY DECEMBER 6, 2022 @ 11:00 a.m. PST
AUCTION PREVIEW: Morning of sale from 8:00 a.m. to 11:00 a.m.
Live Webcast Online Only – No Onsite Bidding
On-line bidding thru bidspotter.com


COVID-19 REGULATION AND REQUIREMENTS:
1) DO NOT VISIT AUCTION SITE IF YOU HAVE FEVER, SHORTNESS OF BREATH, COUGH, NASAL CONGESTIONS, RUNNY NOSE, SORE THROAT, NASUEA,VOMITING AND / OR DIARRHEA.

2) ALL VISITORS, CUSTOMERS, MACHINERY MOVERS, TRUCKERS, SUB CONTRACTORS MUST WEAR A MASK BEFORE ENTERING AUCTION FACILITY.

3) ALL VISITORS MUST FOLLOW SOCIAL DISTANCING OF 2 METERS (6 FT-6 IN) WHEN VISITING AUCTION FACILITY. ONE GROUP AT A TIME WILL BE ALLOWED IN THE FACILITY FOR PREVIEW AND PICK UP


Precision CNC Machining Turning Facility

PRECISION CNC MACHINING AND TURNING FACILITY
LATE MODEL CNC MACHINERY & CNC DRILLING CENTERS: Download Brochure

FEATURING:

CNC Mills :
2012 Haas VF-6/40 4-Axis CNC Vertical Machining Center s/n 1099085 w/ Haas Controls, Hand Wheel, 40-Station Side Mount ATC, BT-40 Taper Spindle, 8100 RPM, Rigid Tapping, Advanced Tool Management, 34-Position Coolant Spigot, Quick Code, Haas Vector Drive, Chip Auger, Coolant.
2011 Fanuc Robodrill α-14iF CNC Drilling Center s/n P10YXA452 w/ Fanuc Series 31i-MODEL A5 Controls, 14-Station ATC, BT-30 Taper Spindle, 80-8000 RPM, 15” x 25 ½” Table, Coolant.
2007 Fanuc Robodrill MATE CNC Drilling Center s/n P07XVN440 w/ Fanuc Series 0i-MC Controls, 14-Station ATC, BT-30 Taper Spindle, 16” x 25 ½”Table, Coolant.
Mori Seiki MV-35/40 CNC Vertical Machining Center s/n 780 w/ Fanuc System 11M Controls, 20-Station ATC, BT-40 Taper Spindle, Coolant.
(2) Mori Seiki MV Junior CNC Vertical Machining Centers w/ Fanuc System 10M Controls, 30-Station ATC,BT-40 Taper Spindle, Coolant.
(2) Mori Seiki MV Junior CNC Vertical Machining Centers w/ Fanuc System 10M Controls, 20-Station ATC,BT-40 Taper Spindle, Coolant.

CNC Lathes :
2005 Daewoo LYNX 220A CNC Turning Center s/n L2200471 w/ Fancu I Series Controls, Tool Presetter,12- Station Turret, Parts Catcher, 6” 3-Jaw Power Chuck, 5C Spindle Nose, Coolant.
2004 Daewoo PU w/ Fanuc Series 21i-TB Controls, Tool Presetter, 12-Station Turret, Hydraulic Tailstock, Parts Catcher, 6” 3-Jaw Power Chuck, 5C Spindle Nose, Chip Conveyor, Coolant.
Mori Seiki SL-3A C 6T Controls, 12-Station Turret, Hydraulic Tailstock, 8” 3-Jaw Power Chuck, 5C Spindle Nose, Coolant.
Mori Seiki SL-1A CNC Turning Center s/n 832 w/Fanuc System 11M Controls, 12-Station Turret, Hydraulic Tailstock, 6” 3-Jaw Power Chuck, Northfield 5” 3-Jaw Power Chuck, Chip Conveyor, Coolant.
Mori Seiki SL-1A CNC Turning Center s/n 836 w/ Fanuc System 10T Controls, 12-Station Turret, Hydraulic Tailstock, 6” 3-Jaw Power Chuck, 5C Spindle Nose, Coolant.
Mori Seiki SL-1H CNC Turning Center s/n 1168 w/ Fanuc System 6T Controls, 8-Station Turret, HydraulicTailstock, 6” 3-Jaw Power Chuck, 5C Spindle Nose, Coolant.
Mori Seiki SL-1A CNC Turning Center s/n 832 w/Fanuc System 11M Controls, 12-Station Turret, Hydraulic Tailstock, 6” 3-Jaw Power Chuck, Northfield 5” 3-Jaw Power Chuck, Chip Conveyor, Coolant.
Mori Seiki SL-1A CNC Turning Center s/n 836 w/ Fanuc System 10T Controls, 12-Station Turret, Hydraulic Tailstock, 6” 3-Jaw Power Chuck, 5C Spindle Nose, Coolant.
Mori Seiki SL-1H CNC Turning Center s/n 1168 w/ Fanuc System 6T Controls, 8-Station Turret, Hydraulic Tailstock, 6” 3-Jaw Power Chuck, 5C Spindle Nose, Coolant.

CNC Lathes :
2005 Daewoo LYNX 220A CNC Turning Center s/n L2200471 w/ Fancu I Series Controls, Tool Presetter,12-Station Turret, Parts Catcher, 6” 3-Jaw Power Chuck, 5C Spindle Nose, Coolant.
2004 Daewoo PUMA 240A CNC Turning Center s/n PM240395 w/ Fanuc Series 21i-TB Controls, Tool Presetter, 12-Station Turret, Hydraulic Tailstock, Parts Catcher, 6” 3-Jaw Power Chuck, 5C Spindle Nose, Chip Conveyor, Coolant.

Lathes :
Hardinge TFB-H Wide Bed Second OP Lathe w/ 125-3000 RPM, Tailstock, Power Feeds, KDK Tool Post, 5C Spindle, 6” 3-Jaw Chuck.
Sharp 1528 15” x 28” Geared Head Gap Bed Lathe s/n 922 w/ 83-1800 RPM, Inch/mm Threading,Tailstock, KDK Tool Post, Trava-Dial, 8” 3-Jaw Chuck.

Mills :
2015 Clark B3V Vertical Mill s/n 150237 w/ Sino SDS6-2V Programmable DRO, 3Hp Motor, 60-4200 Dial Change RPM, R8 Spindle, Chrome Ways, Power “X” and “Y” Feeds.
Moore Jig Boring Machine w/ Sony DRO.

PARTIAL & ABBREVIATED TERMS AND CONDITIONS OF AUCTION

ALL TERMS AND CONDITIONS BEHIND THE BIDDERS CARD SUPPLIED WILL APPLY TO ALL AUCTION SALE ITEMS AND FOR ALL PRIVATE NEGOTIATIONS.
BY PARTICIPATING AND BIDDING AT AUCTION YOU ARE LEGALLY BINDING A CONTRACT WITH THE AUCTION COMPANY.
ALL INVOICES MUST BE PAID WITHIN 24 HOURS FROM AUCTION DATE. IT IS PROHIBITED TO BID ON ANY ITEM THAT CANNOT BE PAID IN FULL WITHIN 24 HOURS FROM AUCTION DATE. PAYMENTS MUST BE CASHIERS CHECK, WIRE TRANSFER, OR LETTER OF GUARANTEE FROM BANK.
ALL ITEMS MUST BE REMOVED BY 3:00 PM (PST) NO LOADING OR PICK UP ON SATURDAY AND SUNDAY.
NO LOADING BY AUCTIONEER OR SELLER.
BUYERS PREMIUM WILL BE 15% AND 18% FOR ALL ONLINE BIDDING ON BIDSPOTTER.COM.
AUCTIONEER IS NOT RESPONSIBLE FOR MIS IDENTIFICATION OF ANY EQUIPMENT OR ASSETS BEING SOLD AT AUCTION EITHER BY VERBAL OR WRITTEN. IT IS THE BUYER’S RESPONSIBILITY TO INSPECT THE GOODS AND ACCERTAIN IF THE SPECIFICATIONS, DESCRIPTIONS AND CONDITION OF THE GOODS CONFORM TO THE BUYER’S REQUIREMENT INCLUDING SERIAL NUMBERS.
BUYER ACKNOWLEDGES THAT THE EQUIPMENT OR ITEMS PURCHASES ONCE MAY HAVE CONTAINED, EXPOSED TO , AND OR UTILIZED HAZARDOUS MATERIAL. THERE MAY BE SURFACES ON ITEMS WHERE DECONTAMINATION CANNOT BE VALIDATED: AS SUCH, THE BUYER OR BIDDER ACKNOWLEDGING THAT THEY ARE ACCEPTING THIS EQUIPMENT OR ITEMS IN AN “AS IS” CONDITION.
BUYER AND THEIR ASSOCIATES WILL HOLD AUCTIONEER HARMLESS AGAINST ANY AND ALL CLAIMS AND ACTIONS ARISING OUT OF THE PARTICIPATION OF THE INDEMNITEE IN THE ACTIVITY, INCLUDING, WITHOUT LIMITATION, EXPENSES, JUDGEMENTS, FINES, SETTLEMENTS AND OTHER AMOUNTS INCURRED IN CONNECTION WITH ANY LIABILITY, SUIT, ACTION, LOSS, OR DAMAGE ARISING OR RESULTING FROM THE INDEMNITEE’S PARTICIPATION IN THE AUCTION.
ALL BIDDERS MUST ONLY USE MACHINERY MOVERS WITH LIABILITY INSURANCE OF $2,000,000 OR HIGHER. NO ITEMS SHALL BE REMOVED UNLESS PAID IN FULL AND ALL ITEMS SHALL BE REMOVED IN THE TIME ALLOCATED BY THE AUCTIONEER.
ALL SALES ARE FINAL, AND ALL ITEMS ARE SOLD AS IS WHERE IS, WITH ALL FAULTS AND DEFECTS.
THERE ARE NO GUARANTEE OR WARRANTY TO ANY ITEMS SOLD (RE: MAKE, MODEL, YEAR, HOURS, MILES, OR MERCHANTABILITY BY AUCTIONEER OR SELLER).
BUYERS RESPONSIBILITY TO INSURE PROPER USE FOR SAFETY.
ALL ITEMS ARE SOLD AS “PARTS ONLY” BUYER ACKNOWLEDGES THAT THE GOODS ARE PRE-OWNED AND GOODS WERE EITHER DESIGNED NOR MANUFACTURED BY SELLER. SELLER HAS NO KNOWLEDGE OF OR CONTROL OVER THE PRIOR USE OR MISUSE OF THE GOODS OR ANY MODIFICATIONS TO THE GOODS FOLLOWING ORIGINAL MANUFACTURER.
NEITHER DOES SELLER HAVE KNOWLEDGE OR CONTROL OVER THE APPLICATION OF THE GOODS BY BUYER. IT IS THE BUYER’S SOLE RESPONSIBILITY TO PROVIDE PROPER SAFETY DEVICES, EQUIPMENT AND INSTRUCTIONS FOR ANY PARTICULAR USE OR TAKE NECESSARY STEPS TO CONFORM THE GOODS AND OPERATION THEREOF TO ALL FEDERAL, STATE OR LOCAL GOVERNMENT SAFETY STANDARDS AND LAWS INCLUDING WITHOUT LIMITATION THE OCCUPATIONAL SAFETY AND HEALTH ACT OF “OSHA”. ANNOUNCEMENTS MADE BY THE AUCTIONEER ON THE DAY OF THE AUCTION TAKE PRECEDENCE OVER ANY PREVIOUS PRINTED MATERIAL PERTAINING TO THIS AUCTION. AUCTIONEER RESERVES THE RIGHT TO REMOVE OR ADD TO ANY AUCTION ITEMS ON THE LIST UNTIL AUCTION TIME.

GALLERY COMING SOON


MAP: Online Bidding Only

TERMS OF SALE:
CASH OR CASHIERS CHECK ONLY.
15% BUYERS PREMIUM ON ALL PURCHASES.
$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH
DEPOSIT TOWARDS ALL PURCHASES. ALL SALES
ARE SUBJECT TO CALIFORNIA SALES TAX. THERE
WILL BE NO EXCEPTIONS.

Filed Under: Upcoming Auctions

Comments are closed.