Medical Device Facility – August 16, 2022

| August 2, 2022 | 0 Comments

Medical Device Facility
Medical Device Facility
AUCTION LOCATION
: 1502 GLADDING CT. MILPITAS, CA
AUCTION DATE: TUESDAY, AUGUST 16, 2022 @ 11:00 a.m. PST
AUCTION PREVIEW: Mornings of sale from 8:00 a.m. to 11:00 a.m.
On-line bidding thru bidspotter.com


COVID-19 REGULATION AND REQUIREMENTS:
1) DO NOT VISIT AUCTION SITE IF YOU HAVE FEVER, SHORTNESS OF BREATH, COUGH, NASAL CONGESTIONS, RUNNY NOSE, SORE THROAT, NASUEA,VOMITING AND / OR DIARRHEA.

2) ALL VISITORS, CUSTOMERS, MACHINERY MOVERS, TRUCKERS, SUB CONTRACTORS MUST WEAR A MASK BEFORE ENTERING AUCTION FACILITY.

3) ALL VISITORS MUST FOLLOW SOCIAL DISTANCING OF 2 METRES (6 FT-6 IN) WHEN VISITING AUCTION FACILITY. ONE GROUP AT A TIME WILL BE ALLOWED IN THE FACILITY FOR PREVIEW AND PICK UP


Medical Device Facility

R AND D MEDICAL DEVICE MFG FACILITY
CNC MFG FACILITY: Download Brochure

Featuring:

Medical Device Facility including:

CNC Mills :
2005 Haas VF-1D CNC Vertical Machining Center s/n 41409 w/ Haas Controls, Hand Wheel, 24-Station Side-Mount ATC, CAT-40 Taper Spindle, 7500 RPM, 20Hp Vector Dual Drive, Haas VOP-D, Rigid Tapping, 1000 IPM, Programmable Coolant Spigot, Coordinate Rotation and Scaling, M19 Spindle Orientation, Macros, Quick Code, Chip Auger, Coolant.
2004 Haas VF-2D CNC Vertical Machining Center s/n 36381 w/ Haas Controls, Hand Wheel, 20-Station ATC, CAT-40 Taper Spindle, 7500 RPM, 20Hp Vector Dual Drive, Rigid Tapping, Quick Code, Chip Auger, Coolant.
Acra AM3 VVA CNC 3-Axis CNC Vertical Mill s/n 0602183 w/ Acu-Rite CNC Controls, (HAS “Z” FAULT ERROR), 0-5000 Dial Change RPM, “Speedy” Power Draw Bar, Chrome Ways, R8 Spindle, 10” x 54” Table.

Support Machinery :
2004 Atlas Copco GX4 FF CSA/UL 5Hp Rotary Air Compressor s/n AII643096 w/ Built-In Refrigerated Air Dryer, 60 Gallon Tank, 20,962 Hours.
Acra RF-1018SV 10” Horizontal Miter Band Saw s/n 59H1631 w/ Manual Clamping, Work Stop, Coolant.
Wilton 14” “Tradesman” Vertical Band Saw w/ 14” x 14” Table.
Jet 15” Pedestal Drill Press w/ 16-Speeds.
Ryobi Bench Mosel Drill Press.
Baldor and Dayton Pedestal Grinders.

OKUMA CADET CNC LATHE, 12’’ CHUCK, TAIL STOCK, 3.5’’ SPINDLE BORE, OKUMA OSP-700L CONTROL, S/N 0267.
(5) TREE 2UVR &2UVG VERTICAL MILLING MACHINES , W/ DRO.
(3) OKUMA MODEL MC-40H CNC HMC’S, 3 PALLET SYSTEM, OKUMA SOP 5000M CONTROLS, 30 ATC.
LE BLOND MAKINO 19’’ X 60’’ ENGINE LATHE, SERVO SHIFT, IN/MM THREADING.
(3) OKUMA CADET-V4020 CNC VMC’S, 40’’ X 20’’ X 20” (XYZ), OKUMA 5020M CONTROL.
(2) OKUMA MODEL MC-40H CNC HMC’S, 3 PALLET SYSTEM, OKUMA SOP 5000M CONTROLS, 30 ATC.
OKUMA LB15 CNC LATHES, W/ TAILSTOCK, OKKUMA OSP 5020L & 5000L CONTROLS, 10 STATION TURRET.
LARGE SELECTION OF VISES, COLLETS, CUTTING TOOLS, CARBIDE TOOLS, DRILL, REAMERS, AND SUPPORT TOOLS.
(2) OKIMA MODEL MC-4VAE VMC’S, 20 ATC, OKUMA 5020M CONTROL OKUMA MODEL MC-4VA VMC, 32 ATC, OSP 5000M-G CONTROL.
BROTHER MODEL TC-215 CNC DRILL AND TAPPING CENTER, 10 ATC.
BROTHER MODEL TC-221 DRILL AND TAP CENTER, 10 ATC, BROTHER CONTROL.
MITUTOYO MODEL B706 CMM, 36’’ X 50’’ TABLE, RENISHAW MIH PROBE.
LARGE SELECTION OF MACHINIST TOOLING AND CABINETS.
LARGE SELECTION OF THREAD AND PLUG GAGES.
OKUMA MODEL MC-4VA VMC, 32 ATC, OSP 5000M-G CONTROL. TSUDAKOMA 5 TH AXIS ROTARY TABLE.
SCHMIDT STYLINER MODEL 2 STYLUS MARKER.
COMCO MICRO BLAST UNIT.
SUNNEN MODEL MBB 1660 & MBB 1801 HONING MACHINES, ONE WITH STROKER.
2014 CHEVY VAN, A/C 2 CAPTAIN CHAIRS, 195,300 MILES, GAS ENGINE.
MARVEL MODEL V-10A VERTICAL IN FEED BAND SAW, PNEUMATIC CLAMPING, CONVEYOR.
MARVEL MODEL 13-A AUTO FEED HORIZONTAL BAND SAW, MULTI CYCLE, PIECE COUNTER.1832 COMCO MICRO BLAST UNIT..

PARTIAL & ABBREVIATED TERMS AND CONDITIONS OF AUCTION

ALL TERMS AND CONDITIONS BEHIND THE BIDDERS CARD SUPPLIED WILL APPLY TO ALL AUCTION SALE ITEMS AND FOR ALL PRIVATE NEGOTIATIONS.
BY PARTICIPATING AND BIDDING AT AUCTION YOU ARE LEGALLY BINDING A CONTRACT WITH THE AUCTION COMPANY.
ALL INVOICES MUST BE PAID WITHIN 24 HOURS FROM AUCTION DATE. IT IS PROHIBITED TO BID ON ANY ITEM THAT CANNOT BE PAID IN FULL WITHIN 24 HOURS FROM AUCTION DATE. PAYMENTS MUST BE CASHIERS CHECK, WIRE TRANSFER, OR LETTER OF GUARANTEE FROM BANK.
ALL ITEMS MUST BE REMOVED BY 3:00 PM (PST) NO LOADING OR PICK UP ON SATURDAY AND SUNDAY.
NO LOADING BY AUCTIONEER OR SELLER.
BUYERS PREMIUM WILL BE 15% AND 18% FOR ALL ONLINE BIDDING ON BIDSPOTTER.COM.
AUCTIONEER IS NOT RESPONSIBLE FOR MIS IDENTIFICATION OF ANY EQUIPMENT OR ASSETS BEING SOLD AT AUCTION EITHER BY VERBAL OR WRITTEN. IT IS THE BUYER’S RESPONSIBILITY TO INSPECT THE GOODS AND ACCERTAIN IF THE SPECIFICATIONS, DESCRIPTIONS AND CONDITION OF THE GOODS CONFORM TO THE BUYER’S REQUIREMENT INCLUDING SERIAL NUMBERS.
BUYER ACKNOWLEDGES THAT THE EQUIPMENT OR ITEMS PURCHASES ONCE MAY HAVE CONTAINED, EXPOSED TO , AND OR UTILIZED HAZARDOUS MATERIAL. THERE MAY BE SURFACES ON ITEMS WHERE DECONTAMINATION CANNOT BE VALIDATED: AS SUCH, THE BUYER OR BIDDER ACKNOWLEDGING THAT THEY ARE ACCEPTING THIS EQUIPMENT OR ITEMS IN AN “AS IS” CONDITION.
BUYER AND THEIR ASSOCIATES WILL HOLD AUCTIONEER HARMLESS AGAINST ANY AND ALL CLAIMS AND ACTIONS ARISING OUT OF THE PARTICIPATION OF THE INDEMNITEE IN THE ACTIVITY, INCLUDING, WITHOUT LIMITATION, EXPENSES, JUDGEMENTS, FINES, SETTLEMENTS AND OTHER AMOUNTS INCURRED IN CONNECTION WITH ANY LIABILITY, SUIT, ACTION, LOSS, OR DAMAGE ARISING OR RESULTING FROM THE INDEMNITEE’S PARTICIPATION IN THE AUCTION.
ALL BIDDERS MUST ONLY USE MACHINERY MOVERS WITH LIABILITY INSURANCE OF $2,000,000 OR HIGHER. NO ITEMS SHALL BE REMOVED UNLESS PAID IN FULL AND ALL ITEMS SHALL BE REMOVED IN THE TIME ALLOCATED BY THE AUCTIONEER.
ALL SALES ARE FINAL, AND ALL ITEMS ARE SOLD AS IS WHERE IS, WITH ALL FAULTS AND DEFECTS.
THERE ARE NO GUARANTEE OR WARRANTY TO ANY ITEMS SOLD (RE: MAKE, MODEL, YEAR, HOURS, MILES, OR MERCHANTABILITY BY AUCTIONEER OR SELLER).
BUYERS RESPONSIBILITY TO INSURE PROPER USE FOR SAFETY.
ALL ITEMS ARE SOLD AS “PARTS ONLY” BUYER ACKNOWLEDGES THAT THE GOODS ARE PRE-OWNED AND GOODS WERE EITHER DESIGNED NOR MANUFACTURED BY SELLER. SELLER HAS NO KNOWLEDGE OF OR CONTROL OVER THE PRIOR USE OR MISUSE OF THE GOODS OR ANY MODIFICATIONS TO THE GOODS FOLLOWING ORIGINAL MANUFACTURER.
NEITHER DOES SELLER HAVE KNOWLEDGE OR CONTROL OVER THE APPLICATION OF THE GOODS BY BUYER. IT IS THE BUYER’S SOLE RESPONSIBILITY TO PROVIDE PROPER SAFETY DEVICES, EQUIPMENT AND INSTRUCTIONS FOR ANY PARTICULAR USE OR TAKE NECESSARY STEPS TO CONFORM THE GOODS AND OPERATION THEREOF TO ALL FEDERAL, STATE OR LOCAL GOVERNMENT SAFETY STANDARDS AND LAWS INCLUDING WITHOUT LIMITATION THE OCCUPATIONAL SAFETY AND HEALTH ACT OF “OSHA”. ANNOUNCEMENTS MADE BY THE AUCTIONEER ON THE DAY OF THE AUCTION TAKE PRECEDENCE OVER ANY PREVIOUS PRINTED MATERIAL PERTAINING TO THIS AUCTION. AUCTIONEER RESERVES THE RIGHT TO REMOVE OR ADD TO ANY AUCTION ITEMS ON THE LIST UNTIL AUCTION TIME.

GALLERY COMING SOON


MAP: Online Bidding Only

TERMS OF SALE:
CASH OR CASHIERS CHECK ONLY.
15% BUYERS PREMIUM ON ALL PURCHASES.
$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH
DEPOSIT TOWARDS ALL PURCHASES. ALL SALES
ARE SUBJECT TO CALIFORNIA SALES TAX. THERE
WILL BE NO EXCEPTIONS.

Filed Under: Auctions

Comments are closed.