Major CNC Machine Tools & Lab Equipment Auction 

 – September 30, 2020

| September 11, 2020 | 0 Comments


2 AUCTION LOCATIONS
:
2954 SEABORG AVE, VENTURA,, CA
1741 FISKE PLACE, OXNARD, CA
AUCTION DATE: WEDNESDAY SEPTEMBER 30, 2020 @ 10:30am. PST
AUCTION PREVIEW: MORNING OF SALE: FROM 8:00 am to 10:30 am
On-line bidding thru bidspotter.com


COVID-19 REGULATION AND REQUIREMENTS:
1) DO NOT VISIT AUCTION SITE IF YOU HAVE FEVER, SHORTNESS OF BREATH, COUGH, NASAL CONGESTIONS, RUNNY NOSE, SORE THROAT, NASUEA,VOMITING AND / OR DIARRHEA.

2) ALL VISITORS, CUSTOMERS, MACHINERY MOVERS, TRUCKERS, SUB CONTRACTORS MUST WEAR A MASK BEFORE ENTERING AUCTION FACILITY.

3) ALL VISITORS MUST FOLLOW SOCIAL DISTANCING OF 2 METRES (6 FT-6 IN) WHEN VISITING AUCTION FACILITY. ONE GROUP AT A TIME WILL BE ALLOWED IN THE FACILITY FOR PREVIEW AND PICK UP


ULTRA PRECISION HAAS CNC MACHINING FACILITY
HANSA TOOLING & ENGINEERING: Download Brochure

FEATURING:
CNC Mills and Lathes :

(2) 2010 Mighty Viper VT-25B CNC Turning Centers s/n’s 4331011012, 4331011011 w/ Fanuc Series 0i-TD Controls, 12-Station Turret, Hydraulic Tailstock, 10” 3-Jaw Power Chuck, Chip Conveyor, Coolant.
2006 Leadwell T-5 CNC Cross Slide Lathe s/n L2TJE0575 w/ Fanuc Series 0i Mate-TC Controls, 5C Collet Nose, 7 ½” x 15” Cross Slide Tooling Table, Coolant.
2001 Takisawa EX-106 CNC Cross Slide Lathe s/n CB08E60284 w/ Fanuc Series 21i-T Controls, 5C Collet Nose, 6 ½” x 17 ¾” Cross Slide Tooling Table, Coolant.
2001 Clausing Metosa SM1560VS 15” x 60” “Smart Lathe” Soft CNC Gap Bed lathe s/n 42299 w/ GE Fanuc Quick Panel PLC Controls, 5C Collet Nose, Tailstock, Phase II Tool Post, Coolant.
Hardinge Cobra 42 CNC Turning Center s/n C-515 w/ Fanuc Series 21-T Controls, 12-Station Turret, 16C Spindle, Chip Conveyor, Coolant.
Hardinge / Omniturn CNC Cross Slide Lathe w/ Omniturn CNC Controls, DV-59/DSM-59 Body, 230-3500 RPM, Pneumatic 5C Collet Closer, 6” x 12” Cross Slide Tooling Table, Coolant.
Hardinge / Fagor CNC Cross Slide Lathe w/ Fagor CNC Controls, Pneumatic 5C Collet Closer, 6” x 12”Cross Slide Tooling Table.
2004 Republic-Lagun VMC-4824-XX CNC Vertical Machining Center s/n 2920 w/Fagor CNC Controls, Hand Wheel, 24-Station ATC, 40-Taper Spindle, 24” x 48” Table, Coolant, 480V.
2000 Fadal VMC 3016L CNC Vertical Machining Center s/n 012000091419 w/ Fadal Mulitprocessor CNC Controls, 21-Station ATC, CAT-40 Taper Spindle, 7500 RPM, Rigid Tapping, High Speed CPU, Graphics,4meg Memory Expansion, Servo Coolant Nozzle, 16” x 38” Table, Coolant.

Fabrication :
2019 Akyapak (NEW) mdl. APK101 4” x 4” Angle Roll s/n 101685 w/ Akyapak Digital Controls, Hydraulic Support and Guide Rollers, 12” Roll Tooling Dies, 230/480V.
2019 Akyapak (NEW) AHS 30-13 10’ Hydraulic 4-Roller Plate Roll s/n SY330-262 w/Akyapak Touch Screen Digital Controls, 122” Roll length, (2) 12” Center Rolls, (2) 10” Outer Rolls, 230/480V.
Grenen / Branch Hydraulics Type HPV6-2.5 106” Hydraulic Power Roll s/n 1961277 w/ 10” Upper Roll, 7 ½” Lower Rolls.
2015 Italforni Pesaro TT600X 600kW Ventilated Electric Kiln s/n 29601 w/ Italforno Controls and Chart Recorder, 48” x 60” x 84” Roll-Out Chamber Car, 600 Deg. C (1112 Deg. F).
Ferrara HY50-4P-DS Hydraulic Coining Press s/n 125/96/12HP w/ 14” x 16” Bolster Area, 8 ¾” x 10 ½”Between Posts.
Wegoma ST-190 Hydraulic Press s/n 1900N16 w/ 9 ½” x 22” Bolster Area, 5 ½” x 18 ½” Between Posts.
Nilson 0-F 1/16” Cap 4-Slide Machine s/n 89761.
(2) Buendgens type US and US-2 Nail and Brad Formers.
(6) Bruderer ESTA-30 33-Ton High Speed Stamping Presses w/ 100-600 Hits/Min.
Heim 12A OBI BG 120 Ton Back geared OBI Stamping Press s/n 2071 w/ 30” x 40” Bolster Area, Pneumatic Clutch. Heim 5G-GAP-F 55 Ton Gap Frame Stamping Press s/n 1926 w/18” x 28” Bolster Area, PneumaticClutch.
Heim 32-301 32 Ton OBI Stamping Press s/n 32-25-1065 w/ 14” x 22” Bolster Area.
W.A. Whitney Duplicating Punch Press s/n 615-250-33126 Air-Over-Hydraulic System, w/ AirCompressor, Air Storage Tank, Duplicator Arm.
W.A.Whitney mdl. 606052 18 Ton Cap Hydraulic Angle Shear s/n 606-052-19921.
2004 Steeger type K80/16-72/98 Wire Braiding Machine s/n 5647.
Miller 5-Axis CNC Robotic Welding System w/ Miller Control Package, Computer Interface Fiber Optic

Grinding and Finishing :
Ballway” 6” x 18” Surface Grinder w/ 6” x 12” Magnetic Chuck.
Gardner mdl. 618 6” x 18” Surface Grinder s/n 7676 w/ Magnetic Chuck.
Mitsui 200MH 6” x 12” Surface Grinder s/n 8002485 w/ Walker Magnetic Chuck.
Supermax HX-150 6” x 12” Surface Grinder s/n 0502 w/ Magnetic Chuck.
Tsugami / Levin T-CGD150 Tool and Cutter Grinder s/n 3638 w/ Custom Motorized Grinding Fixture.
K.O.Lee BA860 Tool and Cutter Grinder s/n 5051 w/Weldon Air Fixture, 5” x 25” Table.
Geetech CT-1332S 13” Open Type Wide Belt Sander s/n 016864 w/ 13” Belt Feed, 2Hp Motor, Rolling Stand.
(2) Burr King 2 ½” Pedestal Belt Sanders.
General Scanning Inc. “Hi-Mark” mdl. HM400 Laser Engraving System s/n 94490212.
Branson B-250-RS Ultrasonic Cleaning System.

Mills and Lathes :
LeBlond Regal 19” x 56” Geared Head Lathe s/n 2E72 w/ 38-1500 RPM, Inch Threading, Taper Attachment, Tailstock, Indexable Tool Post, 13” 3-Jaw Chuck, 10” 3-Jaw Chuck.
Monarch mdl. EE 10” x 20” Tool Room Lathe s/n 43775 w/ 5000 Adjustable RPM, Inch Threading,Tailstock, KDK Tool Post, Pneumatic 5C Collet Closer, 6” 3-Jaw Chuck.
Prybil L-28-23 27” x 60” Cap. Gap Bed Spinning Lathe w/ US Motors Variable Speed Control, Tooling.
(2) Custom Automatic Lens Grinding Lathes w/ Hardinge HSL Body, PLC Controls, Pneumatic Slides,Maple Top Work Bench.
H.E.S. C450 18” x 40” Tracer Lathe s/n 2743 w/ 45-1800 RPM, Tracer Attachment, Tailstock.
Landis Type 8 8” Pipe Threader w/ 8.3-23.5 RPM, (2) 33” 3-Jaw Chucks, 15Hp Motor.
Comet Vertical Mill w/ Quality-800 DRO, Power Feed.
Ex-Cell-O Vertical Mill w/ 100-3800 Dial Change RPM, R8 Spindle, Power Feed, 9” x 36” Table.
Gorton mdl. 8 ½ D Vertical Mill s/n 33391 w/ 4-Speeds, 9” x 34” Table.
Tree 2UVR Vertical Mill s/n 7313 w/ 60-3300 Dial Change RPM, Power Feed, 10 ½” x 47” Table.
Deckel KF1 Pantograph Machine s/n 60327 w/ 17 ¼” x 17 ¾” Work Table, 17” x 23 ½” Template Table.

Grinding and Finishing :
1999 OptoTech GmbH SM200 CNC TC-D and SPK200 CNC-D CNC Lens Grinding and Polishing Machines w/ Siemens Sinumerik Controls, Advanced Setup Technology, 2-Heads, 50mm to 200mm Cap.


PARTIAL & ABBREVIATED TERMS AND CONDITIONS OF AUCTION

ALL TERMS AND CONDITIONS BEHIND THE BIDDERS CARD SUPPLIED WILL APPLY TO ALL AUCTION SALE ITEMS AND FOR ALL PRIVATE NEGOTIATIONS.
BY PARTICIPATING AND BIDDING AT AUCTION YOU ARE LEGALLY BINDING A CONTRACT WITH THE AUCTION COMPANY.
ALL INVOICES MUST BE PAID WITHIN 24 HOURS FROM AUCTION DATE. IT IS PROHIBITED TO BID ON ANY ITEM THAT CANNOT BE PAID IN FULL WITHIN 24 HOURS FROM AUCTION DATE. PAYMENTS MUST BE CASHIERS CHECK, WIRE TRANFER, OR LETTER OF GUARANTEE FROM BANK.
ALL ITEMS MUST BE REMOVED BYJUNE 12, 2019, 3:00 PM (PST) NO LOADING OR PICK UP ON SATURDAY AND SUNDAY.
NO LOADING BY AUCTIONEER OR SELLER.
BUYERS PREMIUM WILL BE 15% AND 18% FOR ALL ONLINE BIDDING ON BIDSPOTTER.COM.
AUCTIONEER IS NOT RESPONSIBLE FOR MIS IDENTIFICATION OF ANY EQUIPMENT OR ASSETS BEING SOLD AT AUCTION EITHER BY VERBAL OR WRITTEN. IT IS THE BUYER’S RESPONSIBILTY TO INSPECT THE GOODS AND ACCERTAIN IF THE SPECIFICATIONS, DESCRIPTIONS AND CONDITION OF THE GOODS CONFORM TO THE BUYER’S REQUIREMENT INCLUDING SERIAL NUMBERS.
BUYER ACKNOWLEDGES THAT THE EQUIPMENT OR ITEMS PURCHASES ONCE MAY HAVE CONTAINED, EXPOSED TO , AND OR UTILIZED HAZARDOUS MATERIAL. THERE MAY BE SURFACES ON ITEMS WHERE DECONTAMINATION CANNOT BE VALIDATED: AS SUCH, THE BUYER OR BIDDER ACKNOWLEDGING THAT THEY ARE ACCEPTING THIS EQUIPMENT OR ITEMS IN AN “AS IS” CONDITION.
BUYER AND THEIR ASSOCIATES WILL HOLD AUCTIONEER HARMLESS AGAINST ANY AND ALL CLAIMS AND ACTIONS ARISING OUT OF THE PARTICIPATION OF THE INDEMNITEE IN THE ACTIVITY, INCUDING, WITHOUT LIMITATION, EXPENSES, JUDGEMENTS, FINES, SETTLEMENTS AND OTHER AMOUNTS INCURRED IN CONNECTION WITH ANY LIABLITY, SUIT, ACTION, LOSS, OR DAMAGE ARISING OR RESULTING FROM THE INDEMNITEE’S PARTICIPATION IN THE AUCTION.
ALL BIDDERS MUST ONLY USE MACHINERY MOVERS WITH LIABILITTY INSURANCE OF $2,000,000 OR HIGHER. NO ITEMS SHALL BE REMOVED UNLESS PAID IN FULL AND ALL ITEMS SHALL BE REMOVED IN THE TIME ALLOCATED BY THE AUCTIONEER.
ALL SALES ARE FINAL, AND ALL ITEMS ARE SOLD AS IS WHERE IS, WITH ALL FAULTS AND DEFECTS.
THERE ARE NO GUARANTEE OR WARRANTY TO ANY ITEMS SOLD (RE: MAKE, MODEL, YEAR, HOURS, MILES, OR MERCHANTABLITY BY AUCTIONEER OR SELLER).
BUYERS RESPONSIBILTY TO INSURE PROPER USE FOR SAFETY.
ALL ITEMS ARE SOLD AS “PARTS ONLY” BUYER ACKNOWLEDES THAT THE GOODS ARE PRE-OWNED AND GOODS WERE EITHER DESIGNED NOR MANUFACTURED BY SELLER. SELLER HAS NO KNOWLEDGE OF OR CONTROL OVER THE PRIOR USE OR MISUSE OF THE GOODS OR ANY MODIFICATIONS TO THE GOODS FOLLOWING ORIGINAL MANUFACURER.
NEITHER DOES SELLER HAVE KNOWLEDGE OR CONTROL OVER THE APPLICATION OF THE GOODS BY BUYER. IT IS THE BUYER’S SOLE RESPONSIBILITY TO PROVIDE PROPER SAFETY DEVICES, EQUIPMENT AND INSTRUCTIONS FOR ANY PARTICULAR USE OR TAKE NECESSARY STEPS TO CONFORM THE GOODS AND OPERATION THEREOF TO ALL FEDERAL, STATE OR LOCAL GOVERNMENT SAFETY STANDARDS AND LAWS INCLUDING WITHOUT LIMITATION THE OCCUPATIONAL SAFETY AND HEALTH ACT OF “OSHA”. ANNOUNCEMENTS MADE BY THE AUCTIONEER ON THE DAY OF THE AUCTION TAKE PRECEDENCE OVER ANY PREVIOUS PRINTED MATERIAL PERTAINING TO THIS AUCTION. AUCTIONEER RESERVES THE RIGHT TO REMOVE OR ADD TO ANY AUCTION ITEMS ON THE LIST UNTIL AUCTION TIME.

GALLERY COMING SOON


MAP: Online Bidding Only

TERMS OF SALE:
CASH OR CASHIERS CHECK ONLY.
15% BUYERS PREMIUM ON ALL PURCHASES.
$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH
DEPOSIT TOWARDS ALL PURCHASES. ALL SALES
ARE SUBJECT TO CALIFORNIA SALES TAX. THERE
WILL BE NO EXCEPTIONS.

Filed Under: Auctions

Comments are closed.