CNC Machine Tools – December 15, 2021

| November 23, 2021 | 0 Comments

CNC Machine Tools
CNC Machine Tools

AUCTION LOCATION: 9703 ALESIA STREET. SOUTH EL MONTE, CA
AUCTION DATE: WEDNESDAY DECEMBER 15, 2021 @ 11:00 a.m. PST
AUCTION PREVIEW: Morning of sale from 8:00am to 11:00 a.m.
On-line bidding thru bidspotter.com


COVID-19 REGULATION AND REQUIREMENTS:
1) DO NOT VISIT AUCTION SITE IF YOU HAVE FEVER, SHORTNESS OF BREATH, COUGH, NASAL CONGESTIONS, RUNNY NOSE, SORE THROAT, NASUEA,VOMITING AND / OR DIARRHEA.

2) ALL VISITORS, CUSTOMERS, MACHINERY MOVERS, TRUCKERS, SUB CONTRACTORS MUST WEAR A MASK BEFORE ENTERING AUCTION FACILITY.

3) ALL VISITORS MUST FOLLOW SOCIAL DISTANCING OF 2 METRES (6 FT-6 IN) WHEN VISITING AUCTION FACILITY. ONE GROUP AT A TIME WILL BE ALLOWED IN THE FACILITY FOR PREVIEW AND PICK UP


CNC MACHINE TOOLS AND METAL FABRICATION
LATE MODEL CNC MACHINE TOOLS: Download Brochure

Featuring:
CNC Lathes :

2009 Mazak INTEGREX 100-III S 6-Axis Twin Spindle Machining Center s/n 372170934 w/ Mazatrol 640 MT Pro Controls, Tool Presetter, 40-Station Tool Changer, KM63 Taper Milling Spindle, 2” Thu Main Spindle Bore, 35-6000 RPM on Main and Sub Spindles, 15-12,000 RPM on Milling Spindle, 225 Degree Stroke on “B” Axis (Milling Head), Main and Sub Spindle “C” Axis @ 0.001 Degrees, Coolant.
2007 Daewoo PUMA TL2000 Twin Turret CNC Turning Center s/n PTL2000059 w/ Fanuc Series 18i-TB Controls, Tool Presetter, 12-Station Upper Turret, 8-Station Lower Turret, 5000 RPM, 3” Thru Spindle Bore, Kennametal KM-LOC II Turret Tooling, 16C Spindle Nose, Coolant.
Hardinge Cobra 65 CNC Turning Center s/n C65-121 w/ Fanuc Series 21-T Controls, 12-Station Turret, Kennametal KM40 Loc-Block Turret Tooling, S26 Collet Pad Nose, CoolJet 70-30 Coolant System.
Hardinge Cobra 65 CNC Turning Center s/n C65-120 w/ Fanuc Series 21-T Controls, 12-Station Turret, Kennametal KM40 Loc-Block Turret Tooling, 10” 2-Jaw Power Chuck, CoolJet 70-30 Coolant System.
Hardinge Cobra 65 CNC Turning Center s/n C65-116 w/ Fanuc Series 21-T Controls, 12-Station Turret, Kennametal KM40 Loc-Block Turret Tooling, S26 Collet Pad Nose, CoolJet 70-30 Coolant System.
Hardinge Cobra 65 CNC Turning Center s/n C65-114 w/ Fanuc Series 21-T Controls, 12-Station Turret, Kennametal KM40 Loc-Block Turret Tooling, S26 Collet Pad Nose, CoolJet 70-30 Coolant System.
Hardinge Cobra 42 CNC Turning Center s/n C-1205 w/ Fanuc Series 21i-T Controls, 12-Station Turret, Kennametal KM32 Loc-Block Turret Tooling, 16C Collet Nose, Coolant.
Hardinge Cobra 42 CNC Turning Center s/n C-1189 w/ Fanuc Series 21i-T Controls, 12-Station Turret, Kennametal KM32 Loc-Block Turret Tooling, 16C Collet Nose, Coolant.
Hardinge Cobra 42 CNC Turning Center s/n C-366 w/ Fanuc Series 21-T Controls, 12-Station Turret, Kennametal KM32 Loc-Block Turret Tooling, 16C Collet Nose, Coolant.
Hardinge Cobra 42 CNC Turning Center s/n C-362 w/ Fanuc Series 21-T Controls, 12-Station Turret, Kennametal KM32 Loc-Block Turret Tooling, 16C Collet Nose, Coolant.
Hardinge Cobra 42 CNC Turning Center s/n C-315 w/ Fanuc Series 21-T Controls, 12-Station Turret, Kennametal KM32 Loc-Block Turret Tooling, 16C Collet Nose, Coolant.
Hardinge Cobra 42 CNC Turning Center s/n C-314 w/ Fanuc Series 21-T Controls, 12-Station Turret, Kennametal KM32 Loc-Block Turret Tooling, 16C Collet Nose, Coolant.

CNC Mills :
Nîgata SPN66 2-Pallet 4-Axis CNC Horizontal Machining Center s/n 46600095 w/ Fanuc 16i-M Controls, Hand Wheel, 60-Station ATC, 50-Taper Spindle, Renishaw Touchless Prob System (NO PROBE), 4th Axis ThruPallets, (2) 24 ¾” x 24 ¾” Pallets, Daikin Oil Cooler, Chip Augers, Chip Conveyor, Coolant.
Mori Seiki MV-55/50 2-Shuttle Pallet CNC Vertical Machining Center s/n 2016 w/ Fanuc MF-M6 Controls, 30-Station ATC, 50-Taper Spindle, Midaco 2-Pallet Shuttle System, (2) 19” x 40” Tables, Oil Cooler, Chip Conveyor, Coolant.
2003 Fadal VMC4525HT CNC Vertical Machining Center s/n 012003105665 w/ Siemens Sinumerik 840 Controls, 24-Station Side Mounted ATC, 40-Taper Spindle, Coolant.
Kitamura Mycenter-2 CNC Vertical Machining Center s/n 10936 w/ Fanuc Series 0-M Controls, 20-Station ATC, BT-40 Taper Spindle, Oilcon Oil Cooler, Coolant.
Accupath Accu II CNC Vertical Mill w/ Centroid CNC Controls, Power Draw-Bar, 9" x 49& Table

CNC Grinder :
2001 Mitsubishi R230-35A CNC Cylindrical Grinder s/n GY082 w/ Mitsubishi Controls, 9” x 15” Cap, 16”Wheel Cap, Coolant.

CNC Saws :
1997 Amada CTB-400 CNC Vertical Band Saw s/n 40850021 w/ Amada CNC Controls, Hydraulic Clamping and Feeds, Chip Conveyor, Coolant.
1997 Amada CTB-400 CNC Vertical Band Saw s/n 40850024 w/ Amada CNC Controls, Hydraulic Clamping and Feeds, Chip Conveyor, Coolant.

Support Machinery :
2012 Eagle CPS20 Power Angle Roll s/n 2012B013 w/ Pendant Controls.
Bridgeport Vertical Mill s/n 101090 w/ 1Hp Motor 80-2720 RPM, 8-Speeds, 9” x 42” Table.
Almco OR-10V 48” Media Tumbler w/ Controls, Compartment Separators, Media Pump.
Walker Turner 3-Head Gang Drill Press.
Rockwell 2-Head Gang Drill Press w/ 24 & x 36 Table.
Buffalo Bench Model Drill Press w/ Stand.
Rutland mdl. DS-20 20” Pedestal Disc Sander s/n 3090006.

PARTIAL & ABBREVIATED TERMS AND CONDITIONS OF AUCTION

ALL TERMS AND CONDITIONS BEHIND THE BIDDERS CARD SUPPLIED WILL APPLY TO ALL AUCTION SALE ITEMS AND FOR ALL PRIVATE NEGOTIATIONS.
BY PARTICIPATING AND BIDDING AT AUCTION YOU ARE LEGALLY BINDING A CONTRACT WITH THE AUCTION COMPANY.
ALL INVOICES MUST BE PAID WITHIN 24 HOURS FROM AUCTION DATE. IT IS PROHIBITED TO BID ON ANY ITEM THAT CANNOT BE PAID IN FULL WITHIN 24 HOURS FROM AUCTION DATE. PAYMENTS MUST BE CASHIERS CHECK, WIRE TRANSFER, OR LETTER OF GUARANTEE FROM BANK.
ALL ITEMS MUST BE REMOVED BY 3:00 PM (PST) NO LOADING OR PICK UP ON SATURDAY AND SUNDAY.
NO LOADING BY AUCTIONEER OR SELLER.
BUYERS PREMIUM WILL BE 15% AND 18% FOR ALL ONLINE BIDDING ON BIDSPOTTER.COM.
AUCTIONEER IS NOT RESPONSIBLE FOR MIS IDENTIFICATION OF ANY EQUIPMENT OR ASSETS BEING SOLD AT AUCTION EITHER BY VERBAL OR WRITTEN. IT IS THE BUYER’S RESPONSIBILITY TO INSPECT THE GOODS AND ACCERTAIN IF THE SPECIFICATIONS, DESCRIPTIONS AND CONDITION OF THE GOODS CONFORM TO THE BUYER’S REQUIREMENT INCLUDING SERIAL NUMBERS.
BUYER ACKNOWLEDGES THAT THE EQUIPMENT OR ITEMS PURCHASES ONCE MAY HAVE CONTAINED, EXPOSED TO , AND OR UTILIZED HAZARDOUS MATERIAL. THERE MAY BE SURFACES ON ITEMS WHERE DECONTAMINATION CANNOT BE VALIDATED: AS SUCH, THE BUYER OR BIDDER ACKNOWLEDGING THAT THEY ARE ACCEPTING THIS EQUIPMENT OR ITEMS IN AN “AS IS” CONDITION.
BUYER AND THEIR ASSOCIATES WILL HOLD AUCTIONEER HARMLESS AGAINST ANY AND ALL CLAIMS AND ACTIONS ARISING OUT OF THE PARTICIPATION OF THE INDEMNITEE IN THE ACTIVITY, INCLUDING, WITHOUT LIMITATION, EXPENSES, JUDGEMENTS, FINES, SETTLEMENTS AND OTHER AMOUNTS INCURRED IN CONNECTION WITH ANY LIABILITY, SUIT, ACTION, LOSS, OR DAMAGE ARISING OR RESULTING FROM THE INDEMNITEE’S PARTICIPATION IN THE AUCTION.
ALL BIDDERS MUST ONLY USE MACHINERY MOVERS WITH LIABILITY INSURANCE OF $2,000,000 OR HIGHER. NO ITEMS SHALL BE REMOVED UNLESS PAID IN FULL AND ALL ITEMS SHALL BE REMOVED IN THE TIME ALLOCATED BY THE AUCTIONEER.
ALL SALES ARE FINAL, AND ALL ITEMS ARE SOLD AS IS WHERE IS, WITH ALL FAULTS AND DEFECTS.
THERE ARE NO GUARANTEE OR WARRANTY TO ANY ITEMS SOLD (RE: MAKE, MODEL, YEAR, HOURS, MILES, OR MERCHANTABILITY BY AUCTIONEER OR SELLER).
BUYERS RESPONSIBILITY TO INSURE PROPER USE FOR SAFETY.
ALL ITEMS ARE SOLD AS “PARTS ONLY” BUYER ACKNOWLEDGES THAT THE GOODS ARE PRE-OWNED AND GOODS WERE EITHER DESIGNED NOR MANUFACTURED BY SELLER. SELLER HAS NO KNOWLEDGE OF OR CONTROL OVER THE PRIOR USE OR MISUSE OF THE GOODS OR ANY MODIFICATIONS TO THE GOODS FOLLOWING ORIGINAL MANUFACTURER.
NEITHER DOES SELLER HAVE KNOWLEDGE OR CONTROL OVER THE APPLICATION OF THE GOODS BY BUYER. IT IS THE BUYER’S SOLE RESPONSIBILITY TO PROVIDE PROPER SAFETY DEVICES, EQUIPMENT AND INSTRUCTIONS FOR ANY PARTICULAR USE OR TAKE NECESSARY STEPS TO CONFORM THE GOODS AND OPERATION THEREOF TO ALL FEDERAL, STATE OR LOCAL GOVERNMENT SAFETY STANDARDS AND LAWS INCLUDING WITHOUT LIMITATION THE OCCUPATIONAL SAFETY AND HEALTH ACT OF “OSHA”. ANNOUNCEMENTS MADE BY THE AUCTIONEER ON THE DAY OF THE AUCTION TAKE PRECEDENCE OVER ANY PREVIOUS PRINTED MATERIAL PERTAINING TO THIS AUCTION. AUCTIONEER RESERVES THE RIGHT TO REMOVE OR ADD TO ANY AUCTION ITEMS ON THE LIST UNTIL AUCTION TIME.

GALLERY COMING SOON


MAP: Online Bidding Only

TERMS OF SALE:
CASH OR CASHIERS CHECK ONLY.
15% BUYERS PREMIUM ON ALL PURCHASES.
$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH
DEPOSIT TOWARDS ALL PURCHASES. ALL SALES
ARE SUBJECT TO CALIFORNIA SALES TAX. THERE
WILL BE NO EXCEPTIONS.

Filed Under: Upcoming Auctions

Comments are closed.