Aerospace Mori Seiki CNC Machining Facility
AUCTION LOCATION: 1030 SOUTH CYPRESS STREET UNIT A. LA HABRA, CA
AUCTION DATE: WEDNESDAY NOVEMBER 29, 2023 @ 11:00 a.m. PST
PREVIEW: Morning of SaleFrom 8:00 a.m. to 11:00 a.m.
Live Webcast Online Only – No Onsite Bidding
On-line bidding thru bidspotter.com
COVID-19 REGULATION AND REQUIREMENTS:
1) DO NOT VISIT AUCTION SITE IF YOU HAVE FEVER, SHORTNESS OF BREATH, COUGH, NASAL CONGESTIONS, RUNNY NOSE, SORE THROAT, NASUEA,VOMITING AND / OR DIARRHEA.
2) ALL VISITORS, CUSTOMERS, MACHINERY MOVERS, TRUCKERS, SUB CONTRACTORS MUST WEAR A MASK BEFORE ENTERING AUCTION FACILITY.
3) ALL VISITORS MUST FOLLOW SOCIAL DISTANCING OF 2 METERS (6 FT-6 IN) WHEN VISITING AUCTION FACILITY. ONE GROUP AT A TIME WILL BE ALLOWED IN THE FACILITY FOR PREVIEW AND PICK UP
Aerospace Mori Seiki CNC Machining Facility
AEROSPACE MORI SEIKI CNC MACHINING FACILITY
CNC TURNING & MILLING/INSPECTION: Download Brochure
FEATURING:
CNC Mills :
1997 Johnsford VMC-1024 CNC Vertical Machining Center s/n VC7855 w/Fanuc 0-M Controls, Hand Wheel, 24-Station ATC, CAT-40 Taper Spindle, 8,000 RPM, 43” x 18 ½” Table, Chip Conveyor, Coolant.
Mori Seiki MV-40/40 CNC Vertical Machining Center s/n 4085 w/ MSC-516 Controls, 20-Station ATC, BT-40 Taper Spindle, 8,000 RPM, Extended Memory, Oilmatic Oil Cooler, 17 ¾” x 43” Table, Coolant.
Mori Seiki MV-40 CNC Vertical Machining Center s/n 2818 w/ Fanuc Controls, 20-Station ATC, BT-40 Taper Spindle, 8000 RPM, Oilmatic Oil Cooler, 41” x 16” x 2” Aluminum Tapped-Hole Fixture Plate, Coolant.
CNC Lathes :
Mori Seiki SL-20 CNC Turning Center s/n 7 w/ Yasnac Controls, 10-Station Turret, Hydraulic Tailstock, 8”3-Jaw Power Chuck, 3J Spindle Nose, Coolant.
Hitachi Seiki HiTec-Turn HT20 CNC Turning Center s/n 20997 w/ Yasnac Controls, Tool Presetter, 10-Station Turret, Hydraulic Tailstock, 8” 3-Jaw Power Chuck, 3J Spindle Nose, Coolant.
Nakamura Tome S-Jr CNC Turning Center s/n 10822 w/ GMF Robotics / Fanuc Controls, 10-Station Turret, 3J Spindle Nose, Chip Conveyor, Coolant.
Mori Seiki SL-5B CNC Turning Center s/n 909 w/ Fanuc 10TE-F Controls, Remex Memory Expansion System, 10-Station Turret, Hydraulic Tailstock, 12” 3-Jaw Power Chuck, Jorgensen Chip Conveyor, Coolant.
Support :
Acra Turn 16X40 16” x 40” Geared Head Gap Bed Lathe s/n N1-8805185 w/ 33-1800 RPM, Inch/mm Threading, Tailstock, Steady Rest, 6-Station Turret Assembly, KDK Tool Post, 8” 3-Jaw Chuck, 5C Collet Closer, Coolant.
Clark Vertical Mill w/ Contour SDS2MS Programmable DRO, 3Hp Motor, 60-4200 Dial Change RPM, R8 Spindle, Chrome Ways, Power Feed, 9” x 49” Table.
2011 Quincy QGS-7.5 7.5Hp Rotary Air Compressor s/n CAI495833 w/ Built-In Refrigerated Air Dryer, 60 Gallon Tank, 3974 Hours.
Majestic 7” Horizontal Band Saw w/ Manual Clamping, 4-Speeds, Work Stop, Coolant.
Craftsman 6” Pedestal Grinder.
6” Bench Grinder.
Craftsman Table Model Drill Press w/ “Laser Trac” System.
Crtaftsman 1.6Hp Portable Air Compressor w/ 26 Gallon Tank.
Parts Washer.
Tooling :
Tsudakoma RZ-200 4 th Axis 8” Rotary Head w/ 5C Collet Nose, TPC Jr Servo Controller.
(3) Teco 6” Angle-Lock Vises.
(3) 6” Angle-Lock Vises.
(40) CAT-40 Taper Tooling.
(54) BT-40 Taper Tooling.
6 ½” 3-Jaw Power Chuck.
Bridgeport 90 Degree Milling Head w/ Arbor Support.
8” 3-Jaw Indexing Rotary Chuck.
(40) 3J Collets.
(100) 5C Collets.
R8 Collets and Tooling.
12” x 15” Adjustable Angle Plate.
12” Rotary Table.
5C Indexing Head.
5C Collet Block Set.
Insert Milling, Turning and Boring Tools w/ Carbide Inserts.
Carbide and HS Endmills, Drills, Taps and Reamers.
Inspection :
2016 VeriSurfX “Master 3D Gage” Portable CMM Arm s/n 7312-5709-UC w/ 1.2m (4’) Measuring Volume, 0.00039” Probing Size Error, 0.00096” Volumetric Accuracy, Wireless Communication, Standard Probe Set, Magnetic Mounting Kit, Travel Case.
Ex-Cell-O mdl. 14-5 14” Optical Comparator s/n 8140066 w/ Anilam Wizard DRO, Surface Illumination.
Sunstrand 6” x 12” Bench Center.
Mitutoyo 12” Digital and Dial Height Gages.
Fowler Bore Gage Setting Master.
Gage Block Sets.
Thread Ring and Plug Gages.
Mitutoyo 0-1” Digital OD Mic.
SPI 0-1” x 6” Deep Throat OD Mic.
Import 0-1”, 1”-2” and 2”-3” Thread Pitch Mics.
Import 2”-6” Dial Bore Gage.
Mitutoyo .7”-1.4” and 1.4”-2.4” Dial Bore Gages.
SPI Dial Chamfer Gages.
Fowler 24” and 12” Digital Calipers.
Mitutoyo 8” Digital Caliper.
Aerospace 12” Dial Caliper.
Mitutoyo 6” Dial Caliper.
Mitutoyo, Starrett and Import OD Mics to 6”.
Starrett 0-6” Depth Mic.
Mitutoyo 0-4” Depth Mic.
PARTIAL & ABBREVIATED TERMS AND CONDITIONS OF AUCTION
ALL TERMS AND CONDITIONS BEHIND THE BIDDERS CARD SUPPLIED WILL APPLY TO ALL AUCTION SALE ITEMS AND FOR ALL PRIVATE NEGOTIATIONS.
BY PARTICIPATING AND BIDDING AT AUCTION YOU ARE LEGALLY BINDING A CONTRACT WITH THE AUCTION COMPANY.
ALL INVOICES MUST BE PAID WITHIN 24 HOURS FROM AUCTION DATE. IT IS PROHIBITED TO BID ON ANY ITEM THAT CANNOT BE PAID IN FULL WITHIN 24 HOURS FROM AUCTION DATE. PAYMENTS MUST BE CASHIERS CHECK, WIRE TRANSFER, OR LETTER OF GUARANTEE FROM BANK.
ALL ITEMS MUST BE REMOVED BY 3:00 PM (PST) NO LOADING OR PICK UP ON SATURDAY AND SUNDAY.
NO LOADING BY AUCTIONEER OR SELLER.
BUYERS PREMIUM WILL BE 15% AND 18% FOR ALL ONLINE BIDDING ON BIDSPOTTER.COM.
AUCTIONEER IS NOT RESPONSIBLE FOR MIS IDENTIFICATION OF ANY EQUIPMENT OR ASSETS BEING SOLD AT AUCTION EITHER BY VERBAL OR WRITTEN. IT IS THE BUYER’S RESPONSIBILITY TO INSPECT THE GOODS AND ACCERTAIN IF THE SPECIFICATIONS, DESCRIPTIONS AND CONDITION OF THE GOODS CONFORM TO THE BUYER’S REQUIREMENT INCLUDING SERIAL NUMBERS.
BUYER ACKNOWLEDGES THAT THE EQUIPMENT OR ITEMS PURCHASES ONCE MAY HAVE CONTAINED, EXPOSED TO , AND OR UTILIZED HAZARDOUS MATERIAL. THERE MAY BE SURFACES ON ITEMS WHERE DECONTAMINATION CANNOT BE VALIDATED: AS SUCH, THE BUYER OR BIDDER ACKNOWLEDGING THAT THEY ARE ACCEPTING THIS EQUIPMENT OR ITEMS IN AN “AS IS” CONDITION.
BUYER AND THEIR ASSOCIATES WILL HOLD AUCTIONEER HARMLESS AGAINST ANY AND ALL CLAIMS AND ACTIONS ARISING OUT OF THE PARTICIPATION OF THE INDEMNITEE IN THE ACTIVITY, INCLUDING, WITHOUT LIMITATION, EXPENSES, JUDGEMENTS, FINES, SETTLEMENTS AND OTHER AMOUNTS INCURRED IN CONNECTION WITH ANY LIABILITY, SUIT, ACTION, LOSS, OR DAMAGE ARISING OR RESULTING FROM THE INDEMNITEE’S PARTICIPATION IN THE AUCTION.
ALL BIDDERS MUST ONLY USE MACHINERY MOVERS WITH LIABILITY INSURANCE OF $2,000,000 OR HIGHER. NO ITEMS SHALL BE REMOVED UNLESS PAID IN FULL AND ALL ITEMS SHALL BE REMOVED IN THE TIME ALLOCATED BY THE AUCTIONEER.
ALL SALES ARE FINAL, AND ALL ITEMS ARE SOLD AS IS WHERE IS, WITH ALL FAULTS AND DEFECTS.
THERE ARE NO GUARANTEE OR WARRANTY TO ANY ITEMS SOLD (RE: MAKE, MODEL, YEAR, HOURS, MILES, OR MERCHANTABILITY BY AUCTIONEER OR SELLER).
BUYERS RESPONSIBILITY TO INSURE PROPER USE FOR SAFETY.
ALL ITEMS ARE SOLD AS “PARTS ONLY” BUYER ACKNOWLEDGES THAT THE GOODS ARE PRE-OWNED AND GOODS WERE EITHER DESIGNED NOR MANUFACTURED BY SELLER. SELLER HAS NO KNOWLEDGE OF OR CONTROL OVER THE PRIOR USE OR MISUSE OF THE GOODS OR ANY MODIFICATIONS TO THE GOODS FOLLOWING ORIGINAL MANUFACTURER.
NEITHER DOES SELLER HAVE KNOWLEDGE OR CONTROL OVER THE APPLICATION OF THE GOODS BY BUYER. IT IS THE BUYER’S SOLE RESPONSIBILITY TO PROVIDE PROPER SAFETY DEVICES, EQUIPMENT AND INSTRUCTIONS FOR ANY PARTICULAR USE OR TAKE NECESSARY STEPS TO CONFORM THE GOODS AND OPERATION THEREOF TO ALL FEDERAL, STATE OR LOCAL GOVERNMENT SAFETY STANDARDS AND LAWS INCLUDING WITHOUT LIMITATION THE OCCUPATIONAL SAFETY AND HEALTH ACT OF “OSHA”. ANNOUNCEMENTS MADE BY THE AUCTIONEER ON THE DAY OF THE AUCTION TAKE PRECEDENCE OVER ANY PREVIOUS PRINTED MATERIAL PERTAINING TO THIS AUCTION. AUCTIONEER RESERVES THE RIGHT TO REMOVE OR ADD TO ANY AUCTION ITEMS ON THE LIST UNTIL AUCTION TIME.
GALLERY COMING SOON
MAP: Online Bidding Only
TERMS OF SALE:
CASH OR CASHIERS CHECK ONLY.
15% BUYERS PREMIUM ON ALL PURCHASES.
$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH
DEPOSIT TOWARDS ALL PURCHASES. ALL SALES
ARE SUBJECT TO CALIFORNIA SALES TAX. THERE
WILL BE NO EXCEPTIONS.
