Precision CNC Machining Facility
AUCTION LOCATION: 26100 AVENUE HALL, VALENCIA, CA
AUCTION DATE: TUESDAY OCTOBER 25,2022 @ 11:00 a.m. PST
AUCTION PREVIEW: Mornings of sale from 9:00 a.m. to 11:00 a.m.
On-line bidding thru bidspotter.com
COVID-19 REGULATION AND REQUIREMENTS:
1) DO NOT VISIT AUCTION SITE IF YOU HAVE FEVER, SHORTNESS OF BREATH, COUGH, NASAL CONGESTIONS, RUNNY NOSE, SORE THROAT, NASUEA,VOMITING AND / OR DIARRHEA.
2) ALL VISITORS, CUSTOMERS, MACHINERY MOVERS, TRUCKERS, SUB CONTRACTORS MUST WEAR A MASK BEFORE ENTERING AUCTION FACILITY.
3) ALL VISITORS MUST FOLLOW SOCIAL DISTANCING OF 2 METERS (6 FT-6 IN) WHEN VISITING AUCTION FACILITY. ONE GROUP AT A TIME WILL BE ALLOWED IN THE FACILITY FOR PREVIEW AND PICK UP
Precision CNC Machining Facility
PRECISION “HAAS” CNC MACHINING & TURNING FACILITY
HAAS TURNING & MACHINING CENTERS: Download Brochure
Featuring:
2002 Haas MDC-1 Dual Pallet CNC Milling / Drilling Center s/n 29420 (Pallet Changer Needs Repair) w/Haas Controls, 24-Station ATC, CAT-40 Taper Spindle, 10,000 RPM, Thru-Spindle Coolant, 2000 IPM, 15”x 26” Table, Travels X=20”, Y=16”, Z=15.5”. High Flow Coolant.
1999 Haas VF-3 4-Axis CNC Vertical Machining Center s/n 17532 w/ Haas Controls, 20-Station ATC, CAT-40 Taper Spindle, 7500 RPM, 20Hp Vector Drive, Sigma Motors X,Y,Z, 8mb Expanded Memory, RigidTapping, Coolant.
1999 Haas VF-3 4-Axis CNC Vertical Machining Center s/n 17438 w/ Haas Controls, 20-Station ATC, CAT-40 Taper Spindle, 7500 RPM, 20Hp Vector Drive, Sigma Motors X,Y,Z, 8mb Expanded Memory, RigidTapping, Coolant.
Mori Seiki MV-Junior CNC Vertical Machining Center s/n 1780 w/ Fanuc 10M Controls, 20-Station ATC, CAT-40 Taper Spindle, Coolant.
Ganesh 5212T CNC Turning Center s/n 0-960101 w/ Fanuc Series 0i MATE-TC Controls, 12-Station Turret.
Dec/2013 Haas ST-10 CNC Turning Center s/n 3097386 w/ Haas Controls, 12-Station Turret, Hydraulic Tailstock, Parts Catcher, 6 ½” 3-Jaw Power Chuck, 5C Spindle Nose, 3J Spindle Nose, S-26 Collet Pad Nose, Coolant, Haas Servo Bar 300 Automatic Bar Loader / Feeder s/n 94351.
2005 Haas Super VF-4 4-Axis CNC Vertical Machining Center s/n 39826 w/ Haas Controls, Hand Wheel, 24-Station ATC, CAT-40 Taper Spindle, 12,000 RPM, VQCPS Probing System, Super Speed VOP-SS, Inline Direct Drive Spindle, High Speed Tool Changer, Thru Spindle Coolant, Floating Point Coprocessor, 10mb Expanded Memory, Brushless A Axis, Rigid Tapping, 20-Position Coolant Spigot, Coordinate Rotation and Scaling, Macros, M19 Spindle Orientation P & R Codes, Chip Auger, Coolant.
2008 Haas VF-3D CNC Vertical Machining Cente s/n 1066806 w/ Haas Controls, 20-Station ATC, CAT-40 Taper Spindle, 7500 RPM, 20Hp Vector Dual Drive, Rigid Tapping, 8mm Pitch Ball Screws, Programmable Coolant Spigot, Advanced Tool Management, Coolant.
2003 Haas VF-2B CNC Vertical Machining Centers/n 33585 w/ Haas Controls, 20-Station ATC, CAT-40 Taper Spindel, 7500 RPM, 20Hp 2-Speed Gear Drive, Thru Spindle Coolant, Rigid Tapping, 8mm Pitch Ball Screws, Coolant.
Ganesh VMC-4924 Controls, Hand Wheel, 24-Station ATC, CAT-40 Taper Spindle, THL Oil Cooler, Coolant.
Ganesh VMC-4020 CNC Vertical Machining Center s/n SMU00016 w/ Fanuc Series 0i-MC Controls, Hand Wheel, 24-Station ATC, CAT-40 Taper Spindle, Coolant.
2003 Haas MDC-1 Dual Pallet CNC Milling / Drilling Center s/n 32186 w/ Haas Controls, 24-Station ATC,CAT-40 Taper Spindle, 10,000 RPM, Thru-Spindle Coolant, 2000 IPM, 15” x 26” Table, Travels X=20”,Y=16”, Z=15.5”. High Flow Coolant.
PARTIAL & ABBREVIATED TERMS AND CONDITIONS OF AUCTION
ALL TERMS AND CONDITIONS BEHIND THE BIDDERS CARD SUPPLIED WILL APPLY TO ALL AUCTION SALE ITEMS AND FOR ALL PRIVATE NEGOTIATIONS.
BY PARTICIPATING AND BIDDING AT AUCTION YOU ARE LEGALLY BINDING A CONTRACT WITH THE AUCTION COMPANY.
ALL INVOICES MUST BE PAID WITHIN 24 HOURS FROM AUCTION DATE. IT IS PROHIBITED TO BID ON ANY ITEM THAT CANNOT BE PAID IN FULL WITHIN 24 HOURS FROM AUCTION DATE. PAYMENTS MUST BE CASHIERS CHECK, WIRE TRANSFER, OR LETTER OF GUARANTEE FROM BANK.
ALL ITEMS MUST BE REMOVED BY 3:00 PM (PST) NO LOADING OR PICK UP ON SATURDAY AND SUNDAY.
NO LOADING BY AUCTIONEER OR SELLER.
BUYERS PREMIUM WILL BE 15% AND 18% FOR ALL ONLINE BIDDING ON BIDSPOTTER.COM.
AUCTIONEER IS NOT RESPONSIBLE FOR MIS IDENTIFICATION OF ANY EQUIPMENT OR ASSETS BEING SOLD AT AUCTION EITHER BY VERBAL OR WRITTEN. IT IS THE BUYER’S RESPONSIBILITY TO INSPECT THE GOODS AND ACCERTAIN IF THE SPECIFICATIONS, DESCRIPTIONS AND CONDITION OF THE GOODS CONFORM TO THE BUYER’S REQUIREMENT INCLUDING SERIAL NUMBERS.
BUYER ACKNOWLEDGES THAT THE EQUIPMENT OR ITEMS PURCHASES ONCE MAY HAVE CONTAINED, EXPOSED TO , AND OR UTILIZED HAZARDOUS MATERIAL. THERE MAY BE SURFACES ON ITEMS WHERE DECONTAMINATION CANNOT BE VALIDATED: AS SUCH, THE BUYER OR BIDDER ACKNOWLEDGING THAT THEY ARE ACCEPTING THIS EQUIPMENT OR ITEMS IN AN “AS IS” CONDITION.
BUYER AND THEIR ASSOCIATES WILL HOLD AUCTIONEER HARMLESS AGAINST ANY AND ALL CLAIMS AND ACTIONS ARISING OUT OF THE PARTICIPATION OF THE INDEMNITEE IN THE ACTIVITY, INCLUDING, WITHOUT LIMITATION, EXPENSES, JUDGEMENTS, FINES, SETTLEMENTS AND OTHER AMOUNTS INCURRED IN CONNECTION WITH ANY LIABILITY, SUIT, ACTION, LOSS, OR DAMAGE ARISING OR RESULTING FROM THE INDEMNITEE’S PARTICIPATION IN THE AUCTION.
ALL BIDDERS MUST ONLY USE MACHINERY MOVERS WITH LIABILITY INSURANCE OF $2,000,000 OR HIGHER. NO ITEMS SHALL BE REMOVED UNLESS PAID IN FULL AND ALL ITEMS SHALL BE REMOVED IN THE TIME ALLOCATED BY THE AUCTIONEER.
ALL SALES ARE FINAL, AND ALL ITEMS ARE SOLD AS IS WHERE IS, WITH ALL FAULTS AND DEFECTS.
THERE ARE NO GUARANTEE OR WARRANTY TO ANY ITEMS SOLD (RE: MAKE, MODEL, YEAR, HOURS, MILES, OR MERCHANTABILITY BY AUCTIONEER OR SELLER).
BUYERS RESPONSIBILITY TO INSURE PROPER USE FOR SAFETY.
ALL ITEMS ARE SOLD AS “PARTS ONLY” BUYER ACKNOWLEDGES THAT THE GOODS ARE PRE-OWNED AND GOODS WERE EITHER DESIGNED NOR MANUFACTURED BY SELLER. SELLER HAS NO KNOWLEDGE OF OR CONTROL OVER THE PRIOR USE OR MISUSE OF THE GOODS OR ANY MODIFICATIONS TO THE GOODS FOLLOWING ORIGINAL MANUFACTURER.
NEITHER DOES SELLER HAVE KNOWLEDGE OR CONTROL OVER THE APPLICATION OF THE GOODS BY BUYER. IT IS THE BUYER’S SOLE RESPONSIBILITY TO PROVIDE PROPER SAFETY DEVICES, EQUIPMENT AND INSTRUCTIONS FOR ANY PARTICULAR USE OR TAKE NECESSARY STEPS TO CONFORM THE GOODS AND OPERATION THEREOF TO ALL FEDERAL, STATE OR LOCAL GOVERNMENT SAFETY STANDARDS AND LAWS INCLUDING WITHOUT LIMITATION THE OCCUPATIONAL SAFETY AND HEALTH ACT OF “OSHA”. ANNOUNCEMENTS MADE BY THE AUCTIONEER ON THE DAY OF THE AUCTION TAKE PRECEDENCE OVER ANY PREVIOUS PRINTED MATERIAL PERTAINING TO THIS AUCTION. AUCTIONEER RESERVES THE RIGHT TO REMOVE OR ADD TO ANY AUCTION ITEMS ON THE LIST UNTIL AUCTION TIME.
GALLERY COMING SOON
MAP: Online Bidding Only
TERMS OF SALE:
CASH OR CASHIERS CHECK ONLY.
15% BUYERS PREMIUM ON ALL PURCHASES.
$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH
DEPOSIT TOWARDS ALL PURCHASES. ALL SALES
ARE SUBJECT TO CALIFORNIA SALES TAX. THERE
WILL BE NO EXCEPTIONS.