Custom Marine Engine Manufacturing
AUCTION LOCATION: 2560 CALCITE CIR., NEWBURY PARK, CA
AUCTION DATE: TUESDAYJULY 12, 2022 @ 11:00 a.m. PST
AUCTION PREVIEW: July 11th from 8:00 a.m. -3:00 p.m.
On-line bidding thru bidspotter.com
COVID-19 REGULATION AND REQUIREMENTS:
1) DO NOT VISIT AUCTION SITE IF YOU HAVE FEVER, SHORTNESS OF BREATH, COUGH, NASAL CONGESTIONS, RUNNY NOSE, SORE THROAT, NASUEA,VOMITING AND / OR DIARRHEA.
2) ALL VISITORS, CUSTOMERS, MACHINERY MOVERS, TRUCKERS, SUB CONTRACTORS MUST WEAR A MASK BEFORE ENTERING AUCTION FACILITY.
3) ALL VISITORS MUST FOLLOW SOCIAL DISTANCING OF 2 METRES (6 FT-6 IN) WHEN VISITING AUCTION FACILITY. ONE GROUP AT A TIME WILL BE ALLOWED IN THE FACILITY FOR PREVIEW AND PICK UP
Custom Marine Engine Manufacturing
CUSTOM MARINE ENGINE / POWERTRAIN MFG AND BOATS
MFG OF HIGHEST QUALITY ENGINES & POWERTRAIN: Download Brochure
Featuring:
Custom Marine Engine Manufacturing including:
Boats And Trucks :
2020 28 ULTRA DECK BOATBOOSTPOWER 550efi (23hrs) Imco SCX DRIVE. Deluxe options on a Tri axle custom extreme trailer.
2022 27 ULTRA SHADOW BALSA CORE CAT HULL ABD TRAILER WITH FINISH GEL CIAT BUILT HEAVY DUTY FOR SPEED. Competitive Tri Axle Trailer 21 Hallett vector #3A race drive, T400 3 speed trans all hardware re anodized and custom LIVORSI gauges. Excellent project boat! Re assemble and go! Engine is a Boostpower 725R 6400 Rpm 496 cube with Holley efi premium parts Trailer is a tandem axle with Method custom black wheels.
1979 Spectra 32 v hull with full cabin twin small block 500hp 410 cubic inch engines low hours, bravo drives, custom trim hyd tabs, Imco full hydraulic steering Gaffrig gauges, AEM at monitors Martinez interior, Bimini and custom boat cover. It’s like a new boat in an original hull. Sits on a triple axle heavy duty trailer.
2003 ARI FREIGHTLINER/MBZ TOTER HOME. Series 60 Detroit diesel with less then 64k original miles, hd generator and multiple heaters ac and 10 speed paddle shift Eaton Fuller Hd transmission. You can eat off the frame stored indoors and used for trade show events. Registered in Cali as a Motorhome! Drive it with a Class C. Heavy duty tag hitch and goose neck options approx 32’ long. Wheels and tires new 1.5 years ago.
Over maintained batteries 1 year old. Great hauler!
Beismeyer wood deck race hull with partial rigging! Custom tandem axle trailer! Own a custom wood deck new production boat! This is a New hull from the original Rayson Craft Sunday mold. V drive setup for top speed! Finish the build and go win some races!
42’ Fountain Super V race boat with full canopy! This is the former works fastest super v hull 142.3 Former Voyager Marine, Former Ocean Spray and former Boostpower rigged hull. This is the boat to finish to go set records or enjoy a poker run. Fresh gel coat on bilge and most rigging in crates. Own a part of history!!
Machining :
2001 Haas VF-0B (Upgraded 2022 – 29 Hours) CNC Vertical Machining Center s/n 25628 w/ Haas Controls, Upgraded Flatscreen Monitor, Hand Wheel, 34-Station Side Mounted ATC, CAT-40 Taper Spindle, 7500 RPM, Programmable Coolant Nozzle, M19 Spindle Orientation, 20Hp, Haas Vector Drive,Quick Code, USB Upgrade, Chip Auger, Coolant.
2012 Clark 1440 14” x 40” Geared Head Gap Bed Lathe s/n 12540 w/ Sino SDS6-2V Programmable DRO,40-1800 RPM, Inch/mm Threading, Tailstock, Steady Rest, Indexing Tool Post, 8” 3-Jaw Chuck, 8” 4-Jaw Chuck.
2012 Clark 2VS Vertical Mill s/n 121424 w/ Sino SDS6-2V Programmable DRO, 3Hp Motor, 60-4200 Dial Change RPM, R8 Spindle, Chrome Ways, Power Feed, 9” x 48” Table.
Lincoln 4800 Torchmate Deluxe CNC 4’ x 8’ Plasma Table s/n 4820SP2.3-20-1356 w/ Lincoln Touch Screen Controls and Software, Program or “On the Fly” Operation, Lincoln Flexcut 125 Plasma Cutting Power Source, 4 ½’ x 9’ Table.
Miller Syncrowave 250 CC-AC/DC Arc Welding Power Source.
Automotive and Marine :
Dyno-Max 2000 Dynamometer w/ Computer Controls, Monitoring Gauges, Cooling Tanks, Basic Automotive and Marine Access.
Easy-Run Engine Test Stand w/ Performance Electronics and Access.
International Dyno Corp. mdl. 4000 Portable Marine Dynamometer s/n 1187 Modifies to 900 Ft Lbs Torque.
Sunnen LBB-1699 Precision Honing Machine s/n 23724 w/ Sunnen YAG-300 Hone Gage.
Sunnen Mandrels, Stones and Truing Sleeves.
Sunnen CRG-750 Cap and Rod Grinder s/n 14170.
Kwik-Way SVSD 1HP Valve Face Grinder s/n 1420D w/ Adjustable Speeds, 265 Metered Hours.
Goodson ERH-2220 Connecting Rod Heater.
MSD Ignition System Tester.
Napa Raylog Generator-Alternator-Starter Tester.
Kelvinator Cryo Lab-1000M Cryogenic Parts Treatment Freezer.
Cuda Karcher Group mdl. H20-2840 Heated Rotary Parts Washing System s/n 10434170-100111 w/Cycle, Heat and Skimmer Controls.
Cuda Aqueous mdl. APW7320A TOP LOAD Automatic Rotary Parts Washer s/n 00500-62740.
Yardarm Rolling Outdrive Storage Rack.
(5) Custom Outdrive – Stern Drive Stands.
Yardarm Sterndrive Installation Jack.
High Performance Marine Engines.
Ready to Finish Short Block Engines
Tooling and Support :
Snap-On 11-Drawer Roll-A-Way Tool Box.
(4) Kurt 6” Angle-Lock Vises.
CAT-40 Taper Tooling.
(4) 4’ x 16’ Heavy Duty Steel Work Benches.
High Performance Parts and Marine Parts and Products.
Hardware, Storage Bins and Cabinets.
Storage Shelves.
Misc :
Antique Furniture including Bedroom Set, Cabinets, Desk, Grand Fathers Clock, Figurines, Artwork,Persian Rugs and More.
PARTIAL & ABBREVIATED TERMS AND CONDITIONS OF AUCTION
ALL TERMS AND CONDITIONS BEHIND THE BIDDERS CARD SUPPLIED WILL APPLY TO ALL AUCTION SALE ITEMS AND FOR ALL PRIVATE NEGOTIATIONS.
BY PARTICIPATING AND BIDDING AT AUCTION YOU ARE LEGALLY BINDING A CONTRACT WITH THE AUCTION COMPANY.
ALL INVOICES MUST BE PAID WITHIN 24 HOURS FROM AUCTION DATE. IT IS PROHIBITED TO BID ON ANY ITEM THAT CANNOT BE PAID IN FULL WITHIN 24 HOURS FROM AUCTION DATE. PAYMENTS MUST BE CASHIERS CHECK, WIRE TRANSFER, OR LETTER OF GUARANTEE FROM BANK.
ALL ITEMS MUST BE REMOVED BY 3:00 PM (PST) NO LOADING OR PICK UP ON SATURDAY AND SUNDAY.
NO LOADING BY AUCTIONEER OR SELLER.
BUYERS PREMIUM WILL BE 15% AND 18% FOR ALL ONLINE BIDDING ON BIDSPOTTER.COM.
AUCTIONEER IS NOT RESPONSIBLE FOR MIS IDENTIFICATION OF ANY EQUIPMENT OR ASSETS BEING SOLD AT AUCTION EITHER BY VERBAL OR WRITTEN. IT IS THE BUYER’S RESPONSIBILITY TO INSPECT THE GOODS AND ACCERTAIN IF THE SPECIFICATIONS, DESCRIPTIONS AND CONDITION OF THE GOODS CONFORM TO THE BUYER’S REQUIREMENT INCLUDING SERIAL NUMBERS.
BUYER ACKNOWLEDGES THAT THE EQUIPMENT OR ITEMS PURCHASES ONCE MAY HAVE CONTAINED, EXPOSED TO , AND OR UTILIZED HAZARDOUS MATERIAL. THERE MAY BE SURFACES ON ITEMS WHERE DECONTAMINATION CANNOT BE VALIDATED: AS SUCH, THE BUYER OR BIDDER ACKNOWLEDGING THAT THEY ARE ACCEPTING THIS EQUIPMENT OR ITEMS IN AN “AS IS” CONDITION.
BUYER AND THEIR ASSOCIATES WILL HOLD AUCTIONEER HARMLESS AGAINST ANY AND ALL CLAIMS AND ACTIONS ARISING OUT OF THE PARTICIPATION OF THE INDEMNITEE IN THE ACTIVITY, INCLUDING, WITHOUT LIMITATION, EXPENSES, JUDGEMENTS, FINES, SETTLEMENTS AND OTHER AMOUNTS INCURRED IN CONNECTION WITH ANY LIABILITY, SUIT, ACTION, LOSS, OR DAMAGE ARISING OR RESULTING FROM THE INDEMNITEE’S PARTICIPATION IN THE AUCTION.
ALL BIDDERS MUST ONLY USE MACHINERY MOVERS WITH LIABILITY INSURANCE OF $2,000,000 OR HIGHER. NO ITEMS SHALL BE REMOVED UNLESS PAID IN FULL AND ALL ITEMS SHALL BE REMOVED IN THE TIME ALLOCATED BY THE AUCTIONEER.
ALL SALES ARE FINAL, AND ALL ITEMS ARE SOLD AS IS WHERE IS, WITH ALL FAULTS AND DEFECTS.
THERE ARE NO GUARANTEE OR WARRANTY TO ANY ITEMS SOLD (RE: MAKE, MODEL, YEAR, HOURS, MILES, OR MERCHANTABILITY BY AUCTIONEER OR SELLER).
BUYERS RESPONSIBILITY TO INSURE PROPER USE FOR SAFETY.
ALL ITEMS ARE SOLD AS “PARTS ONLY” BUYER ACKNOWLEDGES THAT THE GOODS ARE PRE-OWNED AND GOODS WERE EITHER DESIGNED NOR MANUFACTURED BY SELLER. SELLER HAS NO KNOWLEDGE OF OR CONTROL OVER THE PRIOR USE OR MISUSE OF THE GOODS OR ANY MODIFICATIONS TO THE GOODS FOLLOWING ORIGINAL MANUFACTURER.
NEITHER DOES SELLER HAVE KNOWLEDGE OR CONTROL OVER THE APPLICATION OF THE GOODS BY BUYER. IT IS THE BUYER’S SOLE RESPONSIBILITY TO PROVIDE PROPER SAFETY DEVICES, EQUIPMENT AND INSTRUCTIONS FOR ANY PARTICULAR USE OR TAKE NECESSARY STEPS TO CONFORM THE GOODS AND OPERATION THEREOF TO ALL FEDERAL, STATE OR LOCAL GOVERNMENT SAFETY STANDARDS AND LAWS INCLUDING WITHOUT LIMITATION THE OCCUPATIONAL SAFETY AND HEALTH ACT OF “OSHA”. ANNOUNCEMENTS MADE BY THE AUCTIONEER ON THE DAY OF THE AUCTION TAKE PRECEDENCE OVER ANY PREVIOUS PRINTED MATERIAL PERTAINING TO THIS AUCTION. AUCTIONEER RESERVES THE RIGHT TO REMOVE OR ADD TO ANY AUCTION ITEMS ON THE LIST UNTIL AUCTION TIME.
GALLERY COMING SOON
MAP: Online Bidding Only
TERMS OF SALE:
CASH OR CASHIERS CHECK ONLY.
15% BUYERS PREMIUM ON ALL PURCHASES.
$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH
DEPOSIT TOWARDS ALL PURCHASES. ALL SALES
ARE SUBJECT TO CALIFORNIA SALES TAX. THERE
WILL BE NO EXCEPTIONS.
