AUCTION LOCATION: 3592 WILLOW LANE, THOUSAND OAKS, CA
AUCTION DATE: TUESDAY AUGUST 25, 2020 @ 11:00a.m. PST
AUCTION INSPECTION: MORNING OF SALE: FROM 8:00 am to 10:30 am
On-line bidding thru bidspotter.com
COVID-19 REGULATION AND REQUIREMENTS:
1) DO NOT VISIT AUCTION SITE IF YOU HAVE FEVER, SHORTNESS OF BREATH, COUGH, NASAL CONGESTIONS, RUNNY NOSE, SORE THROAT, NASUEA,VOMITING AND / OR DIARRHEA.
2) ALL VISITORS, CUSTOMERS, MACHINERY MOVERS, TRUCKERS, SUB CONTRACTORS MUST WEAR A MASK BEFORE ENTERING AUCTION FACILITY.
3) ALL VISITORS MUST FOLLOW SOCIAL DISTANCING OF 2 METRES (6 FT-6 IN) WHEN VISITING AUCTION FACILITY. ONE GROUP AT A TIME WILL BE ALLOWED IN THE FACILITY FOR PREVIEW AND PICK UP
HASS CNC MACHINING AND GRAPHIC ARTS FACILITY
HASS CNC MACHINES /GRAPHIC DEPARTMENT/AUTOMOBILES: Download Brochure
FEATURING:
Vehicles :
2006 Cross Country SE mdl. 376DS 37.5’Diesel Pusher Motorhome Lisc# 6FEB565 w/ Freightliner Custom Chassis, Cummins 300Hp Turbo Charged Diesel Engine, Allison Automatic Trans, Side and Rear Slide-Outs, Full Kitchen, Bath, HWH Hydraulic Leveling, Air Brakes, AC, Generator, Awnings, 17,245 Miles, VIN# 4UZACJBV45CV77559.
1937 Ford Convertible Coupe Street Rod Lisc 7ASY422 w/ New Corvette LS3 Engine (40 Miles), 6-Speed Trans, 9” Rear End, Rack & Pinion Steering, 4-Wheel Disc Brakes, Suicide Doors, Air Ride technology “Lay Very, Very Low” Suspension, Power Hood and Trunk, Tilt Wheel Steering Column, Custom Leather Interior, Custom Console, Custom Aluminum Gas Tank, Power Windows, Hard Top, VIN# CA869419.
1939 Ford Convertible Roadster Street Rod Lisc# 6MDJ392 w/ Ford 289 Engine, Automatic Trans, 8” Rear End, 4-Wheel Disc Brakes, Suicide Doors, Tilt Wheel Steering Column, Custom Interior, Custom Console, Hard Top, VIN# 18739147Z.
CNC Machines :
2009 Haas EC-1600-4X 4-Axis CNC Horizontal Machining Center s/n 2053113 w/ Haas Controls, Hand Controller, 30-Station Side Mount ATC, CAT-50 Taper Spindle, 6000 RPM, Full 4 th Axis Through 29 ½”Built-In 4 th Axis Rotary, Renishaw Wireless Intuitive Probing System, Renishaw Probe, Haas Vector Drive, High Speed Machining, 50T Haas 16DP-50M Gear Box, Lincoln Spindle Motor, Rigid Tapping, 34-Position Coolant Spigot, Coordinate Rotation and Scaling, Macros, TSC Thru Spindle Coolant, Second Home Button, M19 Spindle Orientation P & R Codes, Intuitive Programming System, Power Failure Module,Quick Code, 32” x 64” Table with 29 ½” Rotary, Chip Augers, Coolant, 3669 Power ON Hours, 668 Cycle Start Hours, 399 Feed Cutting Hours.
2008 Haas VF-6/40 CNC Vertical Machining Center s/n 1071543 w/ Haas Controls, Hand Wheel, 24-Station Side Mount ATC, CAT-40 Taper Spindle, 7500 RPM, Renishaw OTS Wireless Intuitive Probing System, Renishaw Probe, TSC Thru Spindle Coolant, Intuitive Programming System, High Speed Machining, Baldor Spindle Motor, Rigid Tapping, 34-Position Coolant Spigot, Coordinate Rotation andScaling, Macros, M19 Spindle Orientation P & R Codes, Chip Auger, 28” x 64” Table, Coolant, 3796 Power ON Hours, 630 Cycle Start Hours, 443 Feed Cutting Hours.
Lathe and Support :
2008 Eisen PS-4560 45” x 60” Geared Head Lathe s/n 08120678 w/ 6” Thru Spindle Bore, 7-700 RPM,Inch/mm Threading, Tailstock, Indexable Tool Post, 19 ½” 3-Jaw Chuck, 31” 4-Jaw Chuck, Coolant.
Eisen UE-916A 9” Horizontal Band Saw s/n 09014103 w/ 4-Speeds, Manual Clamping, Coolant.Miller Syncrowave 350LX CC-AC/DC Squarewave Welding Power Source s/n LA328686.
Miller Syncrowave 250 CC-AC/DC Arc Welding Power Source s/n KK241954.
Graphics Department :
2016 Mimaki JFX200-2513 Wide Format UV Flatbed Printer s/n R66BB329 w/ 98.4” x 51.2” Print Area,Riser.
2016 Mimaki CJV300-160 63.3” Wide Format Color Printer s/n T567B642.
2016 Royal Sovereign RSC-1651LSH 65” Wide Format Heat Assist Laminator s/n G060086.
2017 Vevor mdl. 130W 130 Watt CO2 CNC Laser Engraving Machine w/ Rotary A-Axis Attachment, 55” x35” Working Area, Auto Laser Software.
.
PARTIAL & ABBREVIATED TERMS AND CONDITIONS OF AUCTION
ALL TERMS AND CONDITIONS BEHIND THE BIDDERS CARD SUPPLIED WILL APPLY TO ALL AUCTION SALE ITEMS AND FOR ALL PRIVATE NEGOTIATIONS.
BY PARTICIPATING AND BIDDING AT AUCTION YOU ARE LEGALLY BINDING A CONTRACT WITH THE AUCTION COMPANY.
ALL INVOICES MUST BE PAID WITHIN 24 HOURS FROM AUCTION DATE. IT IS PROHIBITED TO BID ON ANY ITEM THAT CANNOT BE PAID IN FULL WITHIN 24 HOURS FROM AUCTION DATE. PAYMENTS MUST BE CASHIERS CHECK, WIRE TRANFER, OR LETTER OF GUARANTEE FROM BANK.
ALL ITEMS MUST BE REMOVED BYJUNE 12, 2019, 3:00 PM (PST) NO LOADING OR PICK UP ON SATURDAY AND SUNDAY.
NO LOADING BY AUCTIONEER OR SELLER.
BUYERS PREMIUM WILL BE 15% AND 18% FOR ALL ONLINE BIDDING ON BIDSPOTTER.COM.
AUCTIONEER IS NOT RESPONSIBLE FOR MIS IDENTIFICATION OF ANY EQUIPMENT OR ASSETS BEING SOLD AT AUCTION EITHER BY VERBAL OR WRITTEN. IT IS THE BUYER’S RESPONSIBILTY TO INSPECT THE GOODS AND ACCERTAIN IF THE SPECIFICATIONS, DESCRIPTIONS AND CONDITION OF THE GOODS CONFORM TO THE BUYER’S REQUIREMENT INCLUDING SERIAL NUMBERS.
BUYER ACKNOWLEDGES THAT THE EQUIPMENT OR ITEMS PURCHASES ONCE MAY HAVE CONTAINED, EXPOSED TO , AND OR UTILIZED HAZARDOUS MATERIAL. THERE MAY BE SURFACES ON ITEMS WHERE DECONTAMINATION CANNOT BE VALIDATED: AS SUCH, THE BUYER OR BIDDER ACKNOWLEDGING THAT THEY ARE ACCEPTING THIS EQUIPMENT OR ITEMS IN AN “AS IS” CONDITION.
BUYER AND THEIR ASSOCIATES WILL HOLD AUCTIONEER HARMLESS AGAINST ANY AND ALL CLAIMS AND ACTIONS ARISING OUT OF THE PARTICIPATION OF THE INDEMNITEE IN THE ACTIVITY, INCUDING, WITHOUT LIMITATION, EXPENSES, JUDGEMENTS, FINES, SETTLEMENTS AND OTHER AMOUNTS INCURRED IN CONNECTION WITH ANY LIABLITY, SUIT, ACTION, LOSS, OR DAMAGE ARISING OR RESULTING FROM THE INDEMNITEE’S PARTICIPATION IN THE AUCTION.
ALL BIDDERS MUST ONLY USE MACHINERY MOVERS WITH LIABILITTY INSURANCE OF $2,000,000 OR HIGHER. NO ITEMS SHALL BE REMOVED UNLESS PAID IN FULL AND ALL ITEMS SHALL BE REMOVED IN THE TIME ALLOCATED BY THE AUCTIONEER.
ALL SALES ARE FINAL, AND ALL ITEMS ARE SOLD AS IS WHERE IS, WITH ALL FAULTS AND DEFECTS.
THERE ARE NO GUARANTEE OR WARRANTY TO ANY ITEMS SOLD (RE: MAKE, MODEL, YEAR, HOURS, MILES, OR MERCHANTABLITY BY AUCTIONEER OR SELLER).
BUYERS RESPONSIBILTY TO INSURE PROPER USE FOR SAFETY.
ALL ITEMS ARE SOLD AS “PARTS ONLY” BUYER ACKNOWLEDES THAT THE GOODS ARE PRE-OWNED AND GOODS WERE EITHER DESIGNED NOR MANUFACTURED BY SELLER. SELLER HAS NO KNOWLEDGE OF OR CONTROL OVER THE PRIOR USE OR MISUSE OF THE GOODS OR ANY MODIFICATIONS TO THE GOODS FOLLOWING ORIGINAL MANUFACURER.
NEITHER DOES SELLER HAVE KNOWLEDGE OR CONTROL OVER THE APPLICATION OF THE GOODS BY BUYER. IT IS THE BUYER’S SOLE RESPONSIBILITY TO PROVIDE PROPER SAFETY DEVICES, EQUIPMENT AND INSTRUCTIONS FOR ANY PARTICULAR USE OR TAKE NECESSARY STEPS TO CONFORM THE GOODS AND OPERATION THEREOF TO ALL FEDERAL, STATE OR LOCAL GOVERNMENT SAFETY STANDARDS AND LAWS INCLUDING WITHOUT LIMITATION THE OCCUPATIONAL SAFETY AND HEALTH ACT OF “OSHA”. ANNOUNCEMENTS MADE BY THE AUCTIONEER ON THE DAY OF THE AUCTION TAKE PRECEDENCE OVER ANY PREVIOUS PRINTED MATERIAL PERTAINING TO THIS AUCTION. AUCTIONEER RESERVES THE RIGHT TO REMOVE OR ADD TO ANY AUCTION ITEMS ON THE LIST UNTIL AUCTION TIME.
GALLERY COMING SOON
MAP: Online Bidding Only
TERMS OF SALE:
CASH OR CASHIERS CHECK ONLY.
15% BUYERS PREMIUM ON ALL PURCHASES.
$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH
DEPOSIT TOWARDS ALL PURCHASES. ALL SALES
ARE SUBJECT TO CALIFORNIA SALES TAX. THERE
WILL BE NO EXCEPTIONS.
